If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Miller 211 A.S. and Spoolmate 100
Stickmate LX 235 AC / 160 DC.
Clarke 180 EN Just in case
Spectrum 375 X-Treme.
O/A Medium Radnor Torch, Large Victor Torch.
Milwaukee 14" Chop Saw.
4 x 6 Horizontal Band Saw.
Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
Jackson Passive shade #5 for the plasma.
I almost forgot the Hobart XVP AD Hood.
I cut it out of 12 gauge hot rolled steel. Used 3/4 inch galvanized pipe and a pipe cap. Bought the roof mount and used 3/4" steel rod and 2 ball bearings. Hasn't been even a little breeze all danged day so I still don't know how well it actually works...
Professional firefighter (retired). Amateur everything else I try to do... Oh yeah: GO BIG RED!