Announcement

Collapse
No announcement yet.

Homemade Patio Table

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by stugots View Post
    lol,,, good eye, i didnt see that,,,, same formula


    51.43 x 7 = 360

    I need new glasses ..... I see 10 sides

    www.facebook.com/outbackaluminumwelding
    Miller Dynasty 700...OH YEA BABY!!
    MM 350P...PULSE SPRAYIN' MONSTER
    Miller Dynasty 280 with AC independent expansion card
    Miller Dynasty 200 DX "Blue Lightning"

    Miller Bobcat 225 NT (what I began my present Biz with!)
    Miller 30-A Spoolgun
    Miller WC-115-A
    Miller Spectrum 300
    Miller 225 Thunderbolt (my first machine bought new 1980)
    Miller Digital Elite Titanium 9400

    Comment


    • #17
      You guys crack me up.....

      I am surprised someone didn't suggest working in radians.......

      Comment


      • #18
        Originally posted by stugots View Post
        after you find the degree of the angle, you cut that in half, thats the angle you set your saw at to cut.

        examples,


        60degrees X 6sides = 360 circle ---- 30degrees actual saw cut angle


        45 x 8 = 360 --- half of 45 is 22.5 thats the actual saw cut you make on the part.
        thanks for clearig that up for me
        syncrowave 250
        millermatic 140 with spool gun
        350 dully with 225
        spectrum 375
        lateral band saw
        14in vertical band saw
        14in cold cut saw
        and now a 24x40 shop

        ALL THE STUFF I HAVE BUILT

        www.facebook.com/studiostevens

        Comment


        • #19
          Originally posted by arcs_n_sparks View Post
          You guys crack me up.....

          I am surprised someone didn't suggest working in radians.......
          they are trying not to go off on a tangent. Here's your sine
          Miller 350P
          Miller Econotig
          Milwaukee Dry saw
          Evolution Dry saw (for sale)
          Scotchman 350 cold saw
          7x12 bandsaw
          1910 ATW 14 x 72 lathe
          fridge full of adult beverages
          Sirius radio

          www.snpequipment.com
          callouses and burns a plentysigpic

          Comment


          • #20
            figuring out the angle was tough for me at first, but then i had lunch to clear my head, came back and just laid it out in the carport, tweaked it to make then even, tack welded, then checked again. i got one of those angle finder deals from HF, the protractor type that i used to make sure they were all the same.
            oh and it is a 10 sided table
            Flash me, Im a Welder

            Comment


            • #21
              Originally posted by nrhmarine7 View Post
              so how ever many sides i want i divide that by 360 and thats the angle i cut. Very good to know, i am learning so much just reading what you guys post
              Actually you divide 360 by the number of sides. Then divide that by 2. And that's off a line perpendicular or 90 degrees to the edge of the material in each direction.

              Comment

              Working...
              X