Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Looking for Drive Roll Conversion Kit

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for Drive Roll Conversion Kit

    While conversing with another member here on the forum, I found some parts list that he had provided links for. One of the parts I am interested in is the Miller 2 Roll Drive Roll Conversion Kit #155 454. I have yet to find any on EBay or from any online Miller Dealers or Suppliers. I am wanting to upgrade a MM 200. I recently picked up a Brand New in the box, GA-20C 12ft. stinger and a full set of all nozzles ever made for it. I have also picked up drive rolls for 0.023 and the contact tube for it. I have dual rolls right now, 0.035/0.045 and 0.030/0.035, you just swap sides to match the wire. I would appreciate any help from forum members or someone from Miller in trying to find a set. Thank you.

    Charlie Johnson
    Plainview, TX

  • #2
    Found them...

    Found a set at weldfabulous.com after playing around with my search parameters a bit more. Thanks for the views.
    Last edited by flukecej; 07-06-2010, 04:00 PM. Reason: Spelling

    Comment


    • #3
      what does this conversion kit do? I can't find any info on it.

      Comment


      • #4
        Purpose of Converion Kit

        The Drive Roll Conversion Kit is supposed to allow the user to change the drive rolls in the mig or wire feeder by twisting a knob to remove the roll. Otherwise, you have 3 screws to have to remove and re install one each roll when you change them. On a 2 roll unit, 6 screws, on a four roll unit, 12 screws. I found out about them in a parts list link sent to me. I even found them in a Miller Catalog once. It looked like a solution to changing drive rolls quick and easy when changing wire sizes in a Mig unit like the MM200.

        As I said, I found the kit available at weldfabulous.com. My order came in today but there is a problem with it. Half of the parts that were supposed to be in the kit were not. At present, I am awaiting a reply from Weldfabulous about the fact the kit bag was RESEALED and parts were missing. I was not able to check the package until after business hours. Hopefully my experience with them will be good. I requested a replacement kit, with all the parts its supposed to contain be shipped to me and a RMA with prepaid shipping label and pickup for the defective kit. I will keep everybody posted on how this works out.

        Charlie Johnson
        Plainview, TX

        Comment

        Working...
        X
        Special Offers: See the latest Miller deals and promotions.