Announcement

Collapse
No announcement yet.

Question about sander

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Question about sander

    If you have a 6x48 sander could you take a picture of the table tilt section.Trying to build one and need some ideals. Take picture all views if you can. Thanks for the help

  • #2
    My bracket I designed

    This is what I wanted a picture of. I made this template out of paper looks like it will work but any picture would still be helpful.
    Vernon
    Attached Files

    Comment


    • #3
      It looks like it should work. If you're in doubt then make it out of sheet metal and mock it up on the sander. If it's going to work go ahead and make it out of whatever you had in mind to make it out of. I don't have a belt sander or I'd take a couple of snapshots for you. Sorry.

      Anyway it looks like you're on the right track. Keep up with the progress posts.
      Blondie (Owner C & S Automotive)

      Colt the original point & click interface!

      Millermatic 35 with spot panel
      Miller 340A/BP
      Victor O/A torches
      Lincoln SP125
      Too many other tools to list

      03 Ram 1500
      78 GS1000
      82 GL1100 Interstate

      Comment


      • #4
        Sander Parts

        Originally posted by Blondie_486 View Post
        It looks like it should work. If you're in doubt then make it out of sheet metal and mock it up on the sander. If it's going to work go ahead and make it out of whatever you had in mind to make it out of. I don't have a belt sander or I'd take a couple of snapshots for you. Sorry.

        Anyway it looks like you're on the right track. Keep up with the progress posts.
        Thank you was thing no one was reading my post all these people on here and not one person with a sander willing to help!!!!!!!!! Thank you again

        Comment


        • #5
          You're welcome!
          Blondie (Owner C & S Automotive)

          Colt the original point & click interface!

          Millermatic 35 with spot panel
          Miller 340A/BP
          Victor O/A torches
          Lincoln SP125
          Too many other tools to list

          03 Ram 1500
          78 GS1000
          82 GL1100 Interstate

          Comment


          • #6
            Ditto. If I had a sander, I would shoot you a pic. I haven't even designed mine yet.
            Sometimes there's no second chances.

            Comment


            • #7
              Sander

              Originally posted by davinci2010 View Post
              Ditto. If I had a sander, I would shoot you a pic. I haven't even designed mine yet.
              Thank you And when you start your sander I will help with any info I learned doing mine if you would like. Just ask Thanks again

              Comment

              Working...
              X