Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.


Announcement Module
No announcement yet.

oxt/acet hose reel

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • oxt/acet hose reel

    does anyone have plans for oxy/acet hose reel for welding rig

  • #2
    If you build one make the inside dia. large, so you will make less turn to wind up the hose.
    Good Luck,


    • #3
      Originally posted by cdw View Post
      does anyone have plans for oxy/acet hose reel for welding rig
      Do you see the word "Search" near the top of the page?
      There have been a few different posts on the subject so I'm sure you should find something to get you started.


      • #4
        Cable reels


        I don't have plans, but here are some photos of some cable reels. possibly you can build yours from the photos. Since these are cable reels, you'll notice one is insulated from the stand.


        • #5
          i bought a hand crank air hose reel, put quick dis-connects on the ends, left about 10 foot attached to the bottles, then roll out what i need, connect and go..... unhook and roll it up.... simple and effective


          • #6
            I made one from a fire hose reel. I have a short length of hose to connect the reel to the tanks.

            It's not the roll out while connected type, but it cost next to nothing & works quite well.


            Special Offers: See the latest Miller deals and promotions.