Announcement

Collapse
No announcement yet.

Fabrication Project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • c22reactor
    started a topic Fabrication Project

    Fabrication Project

    Just a few pics of a small fabrication test project . We were given 15 hours and worked to a tolerance of of +- 1mm. All flat plates cut with manual oxy fuel gas. Welded with 111 MMA and 135 Mags. Just thought I should start taking pics. Id like to see any similar projects from you guys. Thanks
    Attached Files

  • Vernon
    replied
    Project

    Originally posted by c22reactor View Post
    Heres a few more jobs I've made . Took a bit more than 15 hours though.







    Love the stailess tank looks real nice

    Leave a comment:


  • Vernon
    replied
    E-bay

    Originally posted by Broccoli1 View Post
    Put it on Ebay- it will certainly get bid up by people with no purpose
    That is so funny but so true somebody would bid on that with know purpose

    Leave a comment:


  • c22reactor
    replied
    Stainless jobs

    Heres a few more jobs I've made . Took a bit more than 15 hours though.







    Last edited by c22reactor; 06-21-2010, 02:56 PM.

    Leave a comment:


  • davinci2010
    replied
    Originally posted by c22reactor View Post
    Project was a test piece for my fabrication qualification. It has no purpose but is designed to test accuracy of cuts and fit up and generally make it akward to put together. There was 32 people on the two test days so theres alot of scrap metal to get rid of at the end.
    Sounds like a great test to prepare fabricator's for the " real world ". Too many people of different skill levels involved, akward fitup, short deadline, then someone else decides it serves no real purpose when completed!

    Leave a comment:


  • Broccoli1
    replied
    Originally posted by c22reactor View Post
    It has no purpose
    Put it on Ebay- it will certainly get bid up by people with no purpose

    Leave a comment:


  • c22reactor
    replied
    Project was a test piece for my fabrication qualification. It has no purpose but is designed to test accuracy of cuts and fit up and generally make it akward to put together. There was 32 people on the two test days so theres alot of scrap metal to get rid of at the end.

    Leave a comment:


  • dairyman
    replied
    We

    How many people worked on this in 15 hours?
    looks like nice work.

    Leave a comment:


  • Vernon
    replied
    pipes and plate

    Looks real nice lot of time to lay that out. Well very nice job.

    Leave a comment:


  • engnerdan
    replied
    Wow that is crazy, what is the purpose? Is this a test in school or for a union?

    -Dan

    Leave a comment:


  • aametalmaster
    replied
    Nice work. It looks like a sheetmetal workers project over here...Bob

    Leave a comment:

Working...
X