Announcement

Collapse
No announcement yet.

Stair Rail Project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stair Rail Project

    Here are a few pictures of a recently complete railing project. The curve was the hardest part. Home owner is very happy with it.
    Attached Files
    Rick

    Trying to succeed, Learning by failing
    HH210 (Merry Christmas to Me)
    HH 140
    Hyper Therm Powermax 600
    Hobart Stickmate AC/DC
    Forge
    Victor & Harris Oxy/Act
    HydMech 225 cold saw
    several grinders
    Rigid Chop Saw
    4x6 band saw
    Never enough clamps

  • #2
    nice work, good lines, and i bet that curve was a little difficult. nice job.
    welder_one

    nothing fancy, just a few hot glue guns for metal
    www.sicfabrications.com

    Comment


    • #3
      I got all excited when I saw Brewer in the pic descriptions, then ---
      All joking aside that is a fine looking job, even without the fermentation tanks in the background.
      Sometimes there's no second chances.

      Comment


      • #4
        very nice railing.
        Miller syncrowave 200 runner with coolmate 4
        and wp2025 weldcraft torch
        Miller 125c plasma cutter

        Comment


        • #5
          Hi nice job, one thing I might suggest is to not be so stringent on spacing dimensions on a custom stair. You must keep to code spacing or smaller which gives the opportunity to adjust spacing of the Balusters and Newels to give the illusion of consistent spacing removing the glitch in rhythm you have at thous locations with adjustment in spacing.

          Comment

          Working...
          X