Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Small alum repair.

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Small alum repair.

    Usually when i get alum jobs they are the ones everyone else in town passes up. This shop called me and said you will like this job. No problem for me. Its a screen door frame for a travel trailer. The round channel pulled out where the hinge was. So i cut some 3/8" alum bar and counterbored a bushing hole in one end. Then i modified some hardware store bushings on my lathe. Then beat the new tube/bar stock into the channel and tacked it with my spoolgun. The frame is only like 1/16" thick so i had to watch it didn't burn away. Tacks will hold it as its in the channel and really can't go anyplace...Bob
    Attached Files

  • #2
    Hey Bob,
    Nice fix. You know, I love those "pass-it-on" jobs other shops won't take or figure it's not worth the aggravation..... usually good $$$. Besides, it generally results in some super references for future work. I'll take them anytime.

    Your fix & method worked well & it is another reason I try to persuade weldors to get a small lathe & mill for those "just-in-case" repairs that may pop in. There is good $$$ to be had for the xtra effort to machine an odd or discontinued part. Always worked for me....

    Denny

    Comment


    • #3
      A mill, a lathe and a couple of welders and you can rebuild the country. Throw in a couple of weldors and you can rebuild the world!

      Comment


      • #4
        Yup gotta have a lathe for sure. I have 5 of them and i am sure thats not enough I had a small job last week where a guy had a trans from a boneyard and the kid wacked off the shifter tube. So he wants me to cut off a good tube off a bad trans and weld it on. I just bored a small tube and welded it on his new trans. Took about 6 minutes and i was off to lunch at Mickey d's with 30 bucks in my pocket...Bob

        Comment


        • #5
          I often tell my wife, after doing some odd household repair: "I don't know how a house can be complete without a machine shop in the basement"

          After 8 years....she understands. Now she wants welding lessons! I'm a lucky guy

          Comment


          • #6
            If she learns to weld she may not need you any longer. Have you ever thought of that?

            Comment

            Working...
            X
            Special Offers: See the latest Miller deals and promotions.