Announcement

Collapse
No announcement yet.

12" by 6"x48" Sander need info

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 12" by 6"x48" Sander need info

    I started building my own sander But I don't know how big the table sould be. If you have a sander like this would you measure yours and let me know. I have no plans to go by sence its home-made. "Need to know how big is the table on the 6"x48" belt" Thank you
    Attached Files
    Last edited by Vernon; 06-01-2010, 08:26 PM.

  • #2
    If by table you are referring to the platen (the backing plate under the belt) check out this Grizzly sander. http://grizzly.com/products/Combinat...-Series/G1014Z

    From the enlarged pictures you should be able to get a good idea of how large to make yours based on the size of your rollers.
    Flash me! I'm a welder.

    American by birth, Union by choice! Boilermakers Local 60

    America is a Union

    Comment


    • #3
      Table

      The table that I'm talking about is 90* out from the backing plate the belt runs on the backing plate is made as show in my pictures Just need to know about the table where the work rest on. And that table has a milled slot in it. Think its about 8" x 15" by 3/4" thick. Added a quick drawling of what I'm looking for.
      Attached Files

      Comment


      • #4
        Make it big enough to accommodate the size pieces you intend to use on it. Don't think there is any set size, just what ever size you think you may need.
        Flash me! I'm a welder.

        American by birth, Union by choice! Boilermakers Local 60

        America is a Union

        Comment


        • #5
          Bob nailed. Make it as big as you want.

          What is that machined slot for? securing grinding jigs? I have seen some setups like that for knifemaking. The jigs are used to keep angles even and such things.

          What do you plan on doing with that grinder? Such a wide belt is definitely not for knifemaking!

          Mikel

          Comment


          • #6
            Sander

            Originally posted by Mikel_24 View Post
            Bob nailed. Make it as big as you want.

            What is that machined slot for? securing grinding jigs? I have seen some setups like that for knifemaking. The jigs are used to keep angles even and such things.

            What do you plan on doing with that grinder? Such a wide belt is definitely not for knifemaking!

            Mikel
            Just a shop Sander for Angle,Flat Bar,Pipe,Square Tubing and channel sanding no one job. Just a shop sander. I wanted to build

            Comment


            • #7
              Originally posted by Vernon View Post
              Just a shop Sander for Angle,Flat Bar,Pipe,Square Tubing and channel sanding no one job. Just a shop sander. I wanted to build
              I built mine for 50x2500mm belts and it is one of the most usefull tools in the shop. I built it thinking about knifemaking but I end up using it for a lot more stuff than just grinding the bevels on the knife blanks.

              Good luck and let us see how that beast eats metal once you finish it!

              Mikel

              Comment


              • #8
                The machined slot would accommodate a protractor such as on a table saw. It would be valuable for repeating angles or to just hold the stock square & rigid. Obtain the protractor prior to milling the slot so that it will not be too close.

                Jerry in Anchorage
                Last edited by muskt; 06-03-2010, 09:45 AM. Reason: Ommission

                Comment


                • #9
                  I have the Grizzly model G1276 sander in the shop. 6" x 48" belt and a 12" disc. The table for the belt sander is 7" x 12 1/2". The table for the disc is 7" x 16 1/2".

                  The mitre slot in both tables comes in very handy. I use an Incra miter gauge in the slot to obtain "true" angles. Works really well for "fine tuning" a corner joint. I would definitely want a miter slot in my table.
                  Syncrowave 250 DX Tigrunner
                  Dynasty 200 DX
                  Miller XMT 304 w/714D Feeder & Optima Control
                  Miller MM 251 w/Q300 & 30A SG
                  Hobart HH187
                  Dialarc 250 AC/DC
                  Hypertherm PM 600 & 1250
                  Wilton 7"x12" bandsaw
                  PC Dry Cut Saw, Dewalt Chop Saw
                  Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
                  Thermco and Smith (2) Gas Mixers
                  More grinders than hands

                  Comment


                  • #10
                    Most of the commercial models have tables that tilt as well. With the mitre gauge that would give you dual bevel capabilities. From the looks of the machine so far, you could design a table tilt and lock that is way better than what's on the store bought models.
                    Sometimes there's no second chances.

                    Comment


                    • #11
                      davinci,

                      He'll be hard pressed to build a tilt mechanism that's better than that found on the Grizzly machine I mentioned.

                      Check out that item on the Grizzly site. Both tables tilt and LOCK firmly in place at any angle.

                      That Grizzly, with a 60 gr belt is a "metal eatin beast".

                      Also has a pretty good dust collection system built in.


                      A good belt sander can be great for tweaking a 45 deg angle on a frame. Ever tried taking off 1/16" with a bandsaw/chop saw/dry cut saw? Easy on a belt sander properly set up with a mitre gauge. Need a 46deg angle? No problem.
                      Last edited by SundownIII; 06-03-2010, 12:50 PM.
                      Syncrowave 250 DX Tigrunner
                      Dynasty 200 DX
                      Miller XMT 304 w/714D Feeder & Optima Control
                      Miller MM 251 w/Q300 & 30A SG
                      Hobart HH187
                      Dialarc 250 AC/DC
                      Hypertherm PM 600 & 1250
                      Wilton 7"x12" bandsaw
                      PC Dry Cut Saw, Dewalt Chop Saw
                      Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
                      Thermco and Smith (2) Gas Mixers
                      More grinders than hands

                      Comment


                      • #12
                        I've heard a lot of good feedback on Grizzly tools. I have a whole host of woodworking tools as well as metal working tools. The woodworking guys I talk to like theirs as well. I might have to give them a try.
                        Sometimes there's no second chances.

                        Comment


                        • #13
                          i have the grizzle sander too great machine
                          Attached Files

                          Comment


                          • #14
                            Sander

                            Originally posted by davinci2010 View Post
                            Most of the commercial models have tables that tilt as well. With the mitre gauge that would give you dual bevel capabilities. From the looks of the machine so far, you could design a table tilt and lock that is way better than what's on the store bought models.
                            My goal is to tilt the table Hopefully I can build a better mouse trap This sander was more work than I first thought. Hope to get it done soon "Real soon"!!! Thanks everbody Vernon

                            Comment


                            • #15
                              On my 9x12 Dayton brand

                              The disc table is 6 x 10, the belt side is 6x10 they both have a dovetail slot in them for the miter gauge and they both tilt.. Like previously posted make it whatever your needs require..
                              Steve

                              Bobcat 250EFI

                              Syncrowave 250

                              Millermatic 350P

                              Hypertherm 1250

                              A Bunch of tools

                              And a forklift to move the heavy stuff with..

                              Torchmate 2x2 CNC Plasma

                              It's Miller Time - Get Back To Work!

                              Comment

                              Working...
                              X