Announcement

Collapse
No announcement yet.

12" by 6"x48" Sander need info

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Sander Table

    Originally posted by Pass-N-Gas View Post
    On my 9x12 Dayton brand

    The disc table is 6 x 10, the belt side is 6x10 they both have a dovetail slot in them for the miter gauge and they both tilt.. Like previously posted make it whatever your needs require..
    Found a sander today I measured the table 14 3/4" by 7 9/16" I will make it 8" by 15" Thanks for all the help guys Vernon

    Comment


    • #17
      Originally posted by Mikel_24 View Post
      Bob nailed. Make it as big as you want.

      What is that machined slot for? securing grinding jigs? I have seen some setups like that for knifemaking. The jigs are used to keep angles even and such things.

      What do you plan on doing with that grinder? Such a wide belt is definitely not for knifemaking!

      Mikel
      Usually the milled slot is used to accommodate a miter gauge such as you would find or use on a table saw. Basically for making accurate angles.
      Blondie (Owner C & S Automotive)

      Colt the original point & click interface!

      Millermatic 35 with spot panel
      Miller 340A/BP
      Victor O/A torches
      Lincoln SP125
      Too many other tools to list

      03 Ram 1500
      78 GS1000
      82 GL1100 Interstate

      Comment

      Working...
      X