Announcement

Collapse
No announcement yet.

tungsten ?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • tungsten ?

    I was woundering what some of u guys use to sharpen ur tung. I have a benchgrinder but i feel that the stone on it is contaminting it. i have a syn 200 ive dedicated 1 side just 4 tung. when i weld steel and i stop the tip of my tung is yellow. when i took my tig class at school i used a belt sander or the pirhanna. im also still on my 1st box of tungsten its a housebrand i got from my lws. any info is always appreciated.

  • #2
    personally, i use a dictionary to sharpen my tongue. ohhhh... you mean tungsten! Sorry. I lost it there for a sec.

    There are tons of posts on the subject. Some like a belt sander while others like a grinder. some stones or belts are dedicated purely to the tung, others arent.

    I have a fairly smooth carbide stone that i use for everything and i dont notice any problems yet
    .
    sharpen your tips to a conical profile 1.5 times the dia of the electrode.
    sharpen in the same direction as the length of the electrode.

    slightly blunt off the point or leave sharp.
    when using A/C the tip or DCEP the tip will form its own ball.

    check this out.. a wealth of info! http://www.millerwelds.com/resources...ur-skills/tig/
    Last edited by SignWave; 11-27-2007, 10:28 PM.
    Will it weld? I loooove electricity!

    Miller 251/30A spool
    Syncro200
    Spectrum 625
    O/A
    Precix 5x10 CNC Router12"Z
    Standard modern lathe
    Cheap Chinese mill that does the trick... sort of...
    horizontal 7x12 bandsaw
    Roland XC540 PRO III
    54" laminator
    hammer and screwdriver (most used)
    little dog
    pooper scooper (2nd most used...)

    Comment


    • #3
      You can look on down the list and find the post I put in about a week or so. And see the things that people posted my on this.

      Comment


      • #4
        This has been beaten to death, a search would turn up lots of good info. i like a diamond lapidary wheel, cheap, easy and fast.
        Dynasty 200 DX
        Millermatic 175
        Spectrum 375
        All kinds of Smith OA gear

        Comment


        • #5
          Tungsten sharpening jig

          This is my version of an idea I got from Flajim over at SFT. It works great and produces consistent, repeatable tips on both my 3/32 and 1/16 tungstens. It was easily made from scrap I had in the shop.
          Attached Files

          Comment


          • #6
            i use something called a stilo tig. it spins the tungsten just from the angle you hold it on the grinder. also try using a bench belt sander with a 120 grit belt or pad.

            Comment

            Working...
            X