Announcement

Collapse
No announcement yet.

252 twin rack project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 252 twin rack project

    started this last night,,,, its removable as well, mounts just like the original one

    i still need to cut the wheel axles to size, and tig it up, ill post some pictures after i get it done.


    going to add the pole and gun rack to it too.
    Attached Files
    Last edited by stugots; 05-02-2010, 06:28 AM.
    Anything you could do, I could do better.
    I can do anything better than you!
    Lockheed Martin
    Armco Steel, Baltimore
    USW local #3185

  • #2
    more pictures
    Attached Files
    Anything you could do, I could do better.
    I can do anything better than you!
    Lockheed Martin
    Armco Steel, Baltimore
    USW local #3185

    Comment


    • #3
      looks good and you saved over $250

      Comment


      • #4
        that was my big incentive, it only took one 2x4 sheet of 11 gauge, plus the pipe for the gun holder.

        i may have even improved on the design LOL

        ok,, im going to get back to work on it!
        Anything you could do, I could do better.
        I can do anything better than you!
        Lockheed Martin
        Armco Steel, Baltimore
        USW local #3185

        Comment


        • #5
          "Sister Sledge"

          Hey Stu: 1st pic of post #2 I see a 5# sledge, minus the handle

          Nice cart, think I'll build one for my MM 212. What's the other machine, another MIG?

          I see you're a USW. I was in Local 3-689 in Southern Ohio back in the early 70's (that's when they were OCAW).

          Are you going to make a holder for a spool gun? They want $95 for one new
          "Bonne journe'e mes amis"

          Comment


          • #6
            yup,, i just got done with the wrap a round arm to hold the pole and a bracket that bolts to the bottom,, no pics yet,, i only stopped in for a break,

            im also using two of the curved bottle cut out scraps ,, for the two sides of the cable holder, so i dont even need to cut those,,, ill post some more pictures in a few hours

            ps: the other miller is a syncrowave 200, and i also have a thermal dynamics cutmaster 39
            Last edited by stugots; 05-02-2010, 10:52 AM.
            Anything you could do, I could do better.
            I can do anything better than you!
            Lockheed Martin
            Armco Steel, Baltimore
            USW local #3185

            Comment


            • #7
              ok its all done,,, just need to round some corners and tig it up...

              i used 22gauge for the cones,, this one holds 4 tools.
              Attached Files
              Anything you could do, I could do better.
              I can do anything better than you!
              Lockheed Martin
              Armco Steel, Baltimore
              USW local #3185

              Comment


              • #8
                one more shot
                Attached Files
                Last edited by stugots; 05-02-2010, 01:34 PM.
                Anything you could do, I could do better.
                I can do anything better than you!
                Lockheed Martin
                Armco Steel, Baltimore
                USW local #3185

                Comment


                • #9
                  ok its all painted,, and it only took a weekend to make
                  Attached Files
                  Last edited by stugots; 05-04-2010, 08:32 AM.
                  Anything you could do, I could do better.
                  I can do anything better than you!
                  Lockheed Martin
                  Armco Steel, Baltimore
                  USW local #3185

                  Comment

                  Working...
                  X