If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I work on metal sculptures in my back yard and having my first art show very soon. in fact i have to have the stuff submitted by friday. THIS FRIDAY AHH.
also...is anyone else out there obsessed with cutting metal this way?mmm
I have a 375 X-treme and for some reason, if the air pressure drops below the required level, the machine will not recognize when the pressure is back up. I finally figured out that all I need to do is turn it off and then back on-in other words, it has to re-boot.
sarahsarah, i found with the 125C if you over tighten the torch parts it will not function correctly. this might have some thing to do with the problem you were having but you need to be a bit more informative as to the problem for us to really help. as for the torch problem ,just tighten it up snug but not really tight.
if you have lots of stuff floating around in the shop you should blow out the inside of the spec 125 every other month at least and keep it coverd when not in use. i keep all my welding equipment coverd when not in use, it makes a big difference in the amount of garbage on the inside.
other common problems stem from a bad ground to worn out consumables. be shore you clean off a spot for a good ground and change consumables when they need it and you should have no trouble with the 125. its a great lil plasma cutter, i just love mine. its so cool to be able to have plasma at home, just too cool.
thanks for the help
hope i helped
feel free to shoot me an e-mail direct i have time to chat. firstname.lastname@example.org
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.