Announcement

Collapse
No announcement yet.

Cat 304cr Dozer push arm repair

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cat 304cr Dozer push arm repair

    Got a call the other day to come out and fix this mess.Customer was moving a very,very large rock to say the least.Snapped 6"x3".025 HSS dozer push arm,and bent the p-side one.Used 2 1-1/2ton chain come alongs to get things back lined up.And platedboth arms with 3/8" plates.Sliced the bent one on 3 sides and pulled straight then rewelded up and plated it.The d-side was the broken one laying on the ground when i arrived.Lots of mud,rain,and drizzle to contend with but got it done.After getting shocked a few times loading 7018 rods.
    Attached Files
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  • #2
    Nice fix. At least i now know i am not the only one who gets bit loading 7018 in the rain...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      As always, Billy, nice repair, also as always, no comments or critiques.
      Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....

      Comment


      • #4
        Looks good. Better then new.

        Comment

        Working...
        X