Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

I built a log splitter

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • I built a log splitter

    20hp Honda GX620
    28gpm two-stage hydraulic pump
    W8 x 40 i-beam
    3/4" plate steel pusher and wedge
    4" cylinder
    1.5" rod
    factory maple round wheels
    ac, cruise... you get the picture
    The yellow unit was a hydraulic power station used by a local water district to push pipes under roads. They retardedly sold it to me for $600. New prices...motor $1600, pump $400, flow meter $400, reservoir, hydraulic fittings and motor controls are spendy too.

    It busts stuff up and I am loving it. There were some VERY gnarly pieces of knotty birch and it wrecked them into kindling The chics seem interested too- cool. I learned the basics of AC stick welding and made some ugleeeee welds. My neighbor welded the wedge to the i-beam and I welded the anchor point for the cylinder- we'll see.

    If anyone asks what part of this project was the hardest... it was definitely drilling the 1" holes for the cylinder clevis points!!! that kind of work will be outsourced if ever needed again.

    The hydraulic fluid is way short on capacity so I'll be adding to it- somehow.

    video of splitting some white birch.
    http://www.oregonian.biz/log-splitte...we-will-go.wmv







    max tow speed 15mph
    Last edited by Johnny; 04-18-2010, 09:57 AM.

  • #2
    That thing's fantastic, and now I have proof that rednecks live everywhere. Wood tires? With all the money you saved on the hydraulics, you could probably afford something a little better than birch rims.

    Comment


    • #3
      your not "with it" at all
      Last edited by Johnny; 04-18-2010, 11:24 AM.

      Comment


      • #4
        Wood must be the new black.

        Comment


        • #5
          wood is in, well that's what my wife said earlier

          Comment


          • #6
            The wood wheels top it off man. From looking at the video, it appears to not have any trouble working over the nasty logs. I'm going to have to keep your idea in the back burner folder for the next time my job sells off an old piece of equipment.

            Nice work.
            Tom

            Comment

            Working...
            X
            Special Offers: See the latest Miller deals and promotions.