Announcement

Collapse
No announcement yet.

New Bumper For The Rig

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • New Bumper For The Rig

    Last week my son decided to make a new front bumper for the rig, and add some storage space in the process. The frame was made from scrap 4" C channel and then covered with of 1/8" aluminum diamond plate. The toolbox from his old pickup provided the added storage compartment. All of his experience and certifications are in steel fabrication with Stick and MIG. This was his first attempt at aluminum TIG welding, having made only a few coupons for familiarization earlier in the day.

    Here are a few pics of the aluminum work (I didn't get any of the steel fabrication). When time allows, it will be dis-assembled and the steel will be sandblasted and painted.

    Charley
    Attached Files
    ______________________________
    Miller MM252
    Miller Bobcat 225NT
    Miller DialArc HF & DIY Cooler
    2 Miller Digital Elite and 3 Fixed Shade Helmets
    2 O/A torch sets
    DeWalt 18 volt 1/2" Driver/Drill
    DeWalt 18 volt 6 1/2" Metal Saw
    DeWalt Porta Band & SWAG Offroad V3 Table
    Milwaukee 8" Dry Cut Saw
    Milwaukee 14" Dry Cut Chop Saw / Delta Stand
    Milwaukee 9" Grinder
    2 Milwaukee 4 1/2" Grinders
    Milwaukee Hole Hawg 1/2" Drill
    Wallace 5 Ton Gantry
    Too many hand tools
Working...
X