Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.


Announcement Module
No announcement yet.

Walnut and Metal table.

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Walnut and Metal table.

    I have had a slab of Walnut for a few years 2 1/2 in thick and after squaring it up it turned out 25 in long by 12 in wide. On it's own not worth much, so last week I had an idea of making a metal frame and making a small table out of it.
    I quite like it, so I thought some of you might get some ideas out of it. I have been a serious woodworker for many years and it is nice to be able to combine the two. I am currently making another one, larger and the joint's on this one are being done with silicone bronze, this will give a nice contrast when clear coated because the top for table is a 32 in by 12 in 2 in lump of rock maple.
    Attached Files

  • #2
    im a big fan of black walnut. thats a really nice table that id hate to put anything on!


    • #3
      that's really sweet man. I always wanted to do some nice wood and incorporate that with some polished or brushed stainless tubing.


      • #4
        Very Good looking table!


        • #5
          Great job. Send us more pics of the next one.


          • #6
            Very cool.

            Another cool way to join woodwork and metalwork is to
            find discarded wood furniture and combine the good
            parts of it with metal work. I made a desk for my stepson
            that way -- we found a discarded dining room table, the
            legs were no good, but the top was decent. I built a metal
            base on which we put the top (after sanding/refinishing/etc)



            • #7
              Walnut looks good on anything. Nice table.


              • #8
                I also do woodworking and want you to know that I really like your table, very nice job.


                • #9
                  Looks awesome! Good work.


                  Special Offers: See the latest Miller deals and promotions.