Announcement

Collapse
No announcement yet.

please show me your shop.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • please show me your shop.

    Hi, I am new to this forum. I have been self employed as a welder for over 15 yrs. I have built projects in a field and borrowed and rented friends shops. I now am almost finished building my own shop. 50 x 80 x 14 with 3 phase.

    I am wanting to see your shop so I can see how and where you place tools and keep it organized. Thanks for any help you can provide.

    Attached is a pic of my shop almost finished, and some boat docks I have built and one with stairs.
    Attached Files

  • #2
    May not do you much good since mine is not one big space...







    Comment


    • #3
      Wow, Nice shop, and huge !!!!!! I wont even post pics of my little shop as you could fit 10 of them in yours....

      Nice dock work also.

      Comment


      • #4
        50x80 sounds like a fortune to heat. I'd love that much space, but I don't know that I could stomach the utility bills.
        Syncrowave 250DX
        Invison 354MP
        XR Control and 30A

        Airco MED20 feeder
        Thermal Dynamics Cutmaster 81
        Smith O/A rig
        And more machinery than you can shake a 7018 rod at

        Comment


        • #5
          Hey, Waterski,
          ..........WOW..........
          sorry, no pic of my "shop" (since I don't have one). Just gloating over yours, and hoping to see more pics soon.
          Welcome to the forum
          I'm not late...
          I'm just on Hawaiian Time

          Comment


          • #6
            Nice start on your new shop.

            Your dock projects appears to be very high end work.

            You may get some ideas here:

            http://www.garageforums.com/forums/

            Have a Nice Day.
            Later,
            Jason

            Professional Spark Generator by Trade.

            Comment


            • #7
              another project of mine

              This is another project I built. Bleachers for a school gym
              Attached Files

              Comment


              • #8
                That's a nice project. Lots of hours.

                Comment


                • #9
                  Lots of factors involved in setting equipment. Everyones needs are different and dimension and door locations are something you are kind of stuck with once it happens. A big factor is where the power comes in and I remember thinking I had some definite plans, don't be scared to change things, I still move something if it works better. I don't have any benches along walls, thats where equipment goes, I like as much floor space as open as it can be.
                  Attached Files
                  Last edited by Sberry; 04-06-2010, 08:18 AM.

                  Comment


                  • #10
                    Man, I would love to have a big place like that ....
                    you can see my little place here ... 4 cams ... one covers the work area, one the front door, one the Bunker interior, and the 4th the outside of my shop area. It is here http://jimyo.psend.com/cam2.html

                    if you want to see the "lounge in my shop, then go here ... http://jimyo.psend.com/bunker.html

                    Of course, I just do little stuff but more space would be nice..

                    Jim
                    sigpicJim Young
                    www.JimYo.com
                    www.youtube.com/jimyo01

                    Comment


                    • #11
                      Like to water ski,

                      My shop is 38 wide x 40' deep with a 16' ceiling.

                      I built 2 overhead cranes with hand pull bridges, I suffered for years without cranes.

                      I used to think having cranes could only be a pipe dream but building them wasnt all that expensive.
                      They are 2 ton each and the cost not including the footings was about
                      $ 16,000

                      As far as the shop goes scale your shop on a large poster board, cut all your tables, welder, steel racks and trucks out of more paper to the same scale.

                      You can then arrange them around your shop.

                      I also put pallet racking down each side of the shop and was able to weld the top of the outside leg to my runway beams letting me remove the lower portion of the outside leg. This gave me alot of storage.

                      Good luck, Your building a good size building.

                      Comment


                      • #12
                        Originally posted by Portable Welder View Post
                        Like to water ski,

                        My shop is 38 wide x 40' deep with a 16' ceiling.

                        I built 2 overhead cranes with hand pull bridges, I suffered for years without cranes.

                        I used to think having cranes could only be a pipe dream but building them wasnt all that expensive.
                        They are 2 ton each and the cost not including the footings was about
                        $ 16,000

                        As far as the shop goes scale your shop on a large poster board, cut all your tables, welder, steel racks and trucks out of more paper to the same scale.

                        You can then arrange them around your shop.

                        I also put pallet racking down each side of the shop and was able to weld the top of the outside leg to my runway beams letting me remove the lower portion of the outside leg. This gave me alot of storage.

                        Good luck, Your building a good size building.
                        So you spent all yer bucks on tools and never got a camera

                        www.facebook.com/outbackaluminumwelding
                        Miller Dynasty 700...OH YEA BABY!!
                        MM 350P...PULSE SPRAYIN' MONSTER
                        Miller Dynasty 280 with AC independent expansion card
                        Miller Dynasty 200 DX "Blue Lightning"

                        Miller Bobcat 225 NT (what I began my present Biz with!)
                        Miller 30-A Spoolgun
                        Miller WC-115-A
                        Miller Spectrum 300
                        Miller 225 Thunderbolt (my first machine bought new 1980)
                        Miller Digital Elite Titanium 9400

                        Comment


                        • #13
                          Let me try getting some pictures, My kids have my shop computer messed up so this might not work.
                          Attached Files

                          Comment


                          • #14
                            I'm in the same situation as you ski, I moved into my shop a year ago march and I'm still trying to figure out what works best. It's very much a personal preferance thing as I've been looking at everyones shop trying to find something I like. So far I've probably moved things around 4 times.
                            sigpic

                            Comment


                            • #15
                              I remember a bud coming in one time and says, "move that damm drill press" Finally occurred to me it wasn't cemented in and didn't have to be there. I have it all on wheels or movable with pallet jack, almost anything could be changed at any time.

                              Comment

                              Working...
                              X