No announcement yet.

Some Small Welding Projects

  • Filter
  • Time
  • Show
Clear All
new posts

  • Some Small Welding Projects

    Been a while since I posted any stuff I've welded, so I finally got a chance to do so. Been a real tough winter down here so I haven't been in the shop much in the last couple of months.

    Name:  1879cb5e98142f98247cd8780a2c6a92.jpg
Views: 1
Size:  182.7 KB

    Name:  e622c57bff214f95290525b6ae57fce8.jpg
Views: 1
Size:  190.7 KB

    Name:  b034683df492c4afb84755494c39a8ef.jpg
Views: 1
Size:  196.3 KB

    Name:  5abc9bd6afe979ccc27b72c561886326.jpg
Views: 1
Size:  183.2 KB

    Name:  e1979be2adc3a8ec400d68453b2e4792.jpg
Views: 1
Size:  174.8 KB

    A couple of these pics show some crosses I make out of horseshoe nails and also the jigs I use to hold the parts in place while I tig them.

    Another couple of pics show my circle cutter and tip standoff I made for my gas torch.

    The other pic is of a rod/pipe holder I made some time ago to keep things in line for welding.


  • #2

    Hey Sporty, where'd you find those 3-way clamps? I see Bessey makes them, and sold through Amazon, but thought you might have found them at HD or Lowe's
    Last edited by davedarragh; 03-31-2010, 05:39 PM.
    "Bonne journe'e mes amis"


    • #3
      Those came from Harbor Freight. If I remember, less than $2.00 each at the time. They're called "edge clamps".
      I've got some I use for woodworking that I got at Sears many years ago. Don't know who made them though. Bought these HF ones so I wouldn't screw my good ones up with spatter.