Announcement

Collapse
No announcement yet.

Some Small Welding Projects

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Some Small Welding Projects

    Been a while since I posted any stuff I've welded, so I finally got a chance to do so. Been a real tough winter down here so I haven't been in the shop much in the last couple of months.

    Click image for larger version

Name:	Pipe & Rod Jig_640X480.jpg
Views:	1
Size:	182.7 KB
ID:	528214

    Click image for larger version

Name:	Torch Accessories1_640X480.jpg
Views:	1
Size:	190.7 KB
ID:	528215

    Click image for larger version

Name:	Torch Accessories2_640X480.jpg
Views:	1
Size:	196.3 KB
ID:	528216

    Click image for larger version

Name:	Crosses_640X480.jpg
Views:	1
Size:	183.2 KB
ID:	528217

    Click image for larger version

Name:	Cross fixtures_640X480.jpg
Views:	1
Size:	174.8 KB
ID:	528218

    A couple of these pics show some crosses I make out of horseshoe nails and also the jigs I use to hold the parts in place while I tig them.

    Another couple of pics show my circle cutter and tip standoff I made for my gas torch.

    The other pic is of a rod/pipe holder I made some time ago to keep things in line for welding.

    Enjoy.

  • #2
    "Tri-Clamps?"

    Hey Sporty, where'd you find those 3-way clamps? I see Bessey makes them, and sold through Amazon, but thought you might have found them at HD or Lowe's
    Last edited by davedarragh; 03-31-2010, 05:39 PM.
    "Bonne journe'e mes amis"

    Comment


    • #3
      Those came from Harbor Freight. If I remember, less than $2.00 each at the time. They're called "edge clamps".
      I've got some I use for woodworking that I got at Sears many years ago. Don't know who made them though. Bought these HF ones so I wouldn't screw my good ones up with spatter.

      Comment

      Working...
      X