Announcement

Collapse
No announcement yet.

Aluminium Workshop Bin

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aluminium Workshop Bin

    Every workshop needs a bin.
    For housing waste be it scrap metal, filings, swarf or mistakes.
    I have just constructed a new workshop/Welding bay and need a metal bin for all of the above reasons. I rang all the major hardwares and the machinery shop, I then rang an industrial cleaning supply company but alas none had a small metal bin.

    They all had plastic bins and some had S/S bins with plastic liners.
    No good when a red hot piece of metal is tossed into it.

    I used aluminium tread plate for the flooring of my workshop and had a few pieces of scrap left over. I thought why don't I make my own bin out of the same material as the flooring.
    Custom job.

    Ji
    Attached Files
    Grip it and Rip it

  • #2
    I marked up the 1.4mm alloy tread plate and folded it in my panbrake.

    Ji
    Attached Files
    Grip it and Rip it

    Comment


    • #3
      This stuff folds pretty easy and looks great.

      Ji
      Attached Files
      Grip it and Rip it

      Comment


      • #4
        I placed the tail of my scrap into my home made shear and cut to length.

        Ji
        Attached Files
        Grip it and Rip it

        Comment


        • #5
          I then clamped the folded sides together.

          Ji
          Attached Files
          Grip it and Rip it

          Comment


          • #6
            I then switched on the TIG welder and let it warm up for 30 minutes before welding up the side joint.

            Ji
            Attached Files
            Grip it and Rip it

            Comment


            • #7
              I then cut and clamped in the bottom and started welding.

              Ji
              Attached Files
              Grip it and Rip it

              Comment


              • #8
                With the bottom welded in the bin was complete.

                Ji
                Attached Files
                Grip it and Rip it

                Comment


                • #9
                  My alloy welding is getting better and the panbrake broadens what I can make.

                  Ji
                  Attached Files
                  Grip it and Rip it

                  Comment


                  • #10
                    Great job Ji! You just remainded me I have to do one for my shop as well.

                    Your tig looks well.Trying to keep the bead on a straight line is difficult to me, how do you do it?

                    thank´s!

                    Regards:
                    Jerónimo.

                    Traumao č la elčtrica.

                    Comment


                    • #11
                      not to jack your thread but trans fluid drums which are usually about 20 gal drums work AWESOME just call up some local shops sure you could find one.

                      Comment


                      • #12
                        Hi Jerónimo,
                        I find that part easy,
                        Just position your torch hand so it runs with the joint.
                        These outside edge welds lend themselves to this style.
                        Keep up the practise it is worth it.
                        A metal bin does not sound like a hard thing to find for sale but it can be.

                        Ji
                        Attached Files
                        Grip it and Rip it

                        Comment


                        • #13
                          Hi Letzgoaracin,
                          In the begining I was after any kind of a metal bin for sale. Then I wanted something shiny like alloy or stainless steel. In the end I would have settled for just about any kind of metal but there was none for sale.
                          Friends did suggest using a 20 litre oil drum but after they saw my floor retracted their recommendation.

                          Ji
                          Attached Files
                          Grip it and Rip it

                          Comment


                          • #14
                            Bin two after being folded and clamped ready to have the side seam welded up.

                            Ji
                            Attached Files
                            Grip it and Rip it

                            Comment


                            • #15
                              The alloy angle I use to square up the side seam also acts like a heat sink and helpd remove some heat from the 1.4mm bin material.

                              Ji
                              Attached Files
                              Grip it and Rip it

                              Comment

                              Working...
                              X