Announcement

Collapse
No announcement yet.

Need welding work done-Norman OK

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need welding work done-Norman OK

    I've called multiple local welding companies but no one seems to know anyone who can/will do this work.

    I've got a pressure fryer where the weld has broken on a pipe that enters the pot. The pipe is crucial because it is the part to provides pressure. The manufacturer says it simply needs a tack weld.

    I spoke with a few guys here locally and they said it needs a tig welder becasue it is most likely stainless steel.

    If you know anyone who can do this work please let me know.

    Thanks

  • #2
    Where are you located? That would help.

    -Dan
    Owner
    DW Metalworks LLC
    Miller Trailblazer 302
    Miller 8RC Feeder
    Miller Passport Plus
    Miller Dynasty 200 DX W/Coolmate 1
    Hobart Handler 135
    Hypertherm PowerMAX 30
    Smith O/A Torch Set
    Plus more tools then my wife will ever know about....

    Comment


    • #3
      Norman, OK I-35 and Main St.

      Comment


      • #4
        That is Norman, Oklahoma.
        Millermatic 211 AutoSet w/MVP
        Century 110 volt 90/110 MIG-Gone to my son, in Texas
        Victor SuperRange OA
        Milwaukee Cold Cut Saw
        Milwaukee Portable Deep Cut Bandsaw
        Milwaukee Hole Hawg
        Jet Horizontal/Vertical Bandsaw
        Jet MD-18 Mill Drill
        Orbit Drill Press
        12 Ton Floor Press
        2002 E-350 V-10:
        1983 F-150 4.9L 6
        2004 Honda ST1300
        2007 Suzuki LTA400F Quad
        1997 Suzuki DR650

        Comment


        • #5
          any job shop should be able to do it for you. They might be concerned about it being pressurized if they aren't a pressure shop.

          Comment


          • #6
            I'm in Muskogee and know quite a few guys around here that will do it. Don't know if you are willing do drive 2 and a half hours to get it done though.

            Comment


            • #7
              Get calls like this all the time....

              I love when I get calls for people who want a railing welded or something small. Then they want me to come out, and freak when I tell them on the phone that it will be 400-500 for me to come out. They think i will drive 2 hours, to do a 20 minute job, for 50 bucks!! Hopefully this guy will be reasonable.
              Kevin
              Lincoln ranger 305g x2
              Ln25
              Miller spectrum 625
              Miller 30a spoolgun
              Wc115a
              Lincoln 210mp
              F550 imt service truck

              Comment


              • #8
                welding just north of norman

                I can help you get what you need welded.. 405 990 1728

                Comment

                Working...
                X