Announcement

Collapse
No announcement yet.

Bench Space Saver

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bench Space Saver

    To save bench space on my workbench I made a receiver hitch for the workbench in my shop. As I have built, I have added these to my welding table, and shop press. These also fit in a truck receiver hitch so I can go mobile with all my bench top tools. I weld a nut on them and use a bolt to make them tight so they don't wobble around. I also have made most a little long so I can use them in the truck with the tailgate down.
    Click image for larger version

Name:	Bench Mounts.jpg
Views:	4
Size:	74.4 KB
ID:	528127

    Click image for larger version

Name:	Press Front.jpg
Views:	3
Size:	88.3 KB
ID:	528128

    Click image for larger version

Name:	welding table 6.jpg
Views:	4
Size:	86.3 KB
ID:	528129

    Click image for larger version

Name:	DSC07937.JPG
Views:	1
Size:	89.0 KB
ID:	528130
    "The only source of knowledge is experience." Albert Einstein

  • #2
    http://www.millerwelds.com/resources...ad.php?t=18743

    great space saving. I used receivers too. You can pack a lot of attachments in a small area when space is at a premium.

    Comment


    • #3
      Nice looking mounts pro70. I did the vise back in 96 and have been doing all my stuff like that since then. The initial reason was for portability to job sites, but it was such a space save I keep on doing it with other tools.
      "The only source of knowledge is experience." Albert Einstein

      Comment

      Working...
      X