Announcement

Collapse
No announcement yet.

Bench Space Saver

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bench Space Saver

    To save bench space on my workbench I made a receiver hitch for the workbench in my shop. As I have built, I have added these to my welding table, and shop press. These also fit in a truck receiver hitch so I can go mobile with all my bench top tools. I weld a nut on them and use a bolt to make them tight so they don't wobble around. I also have made most a little long so I can use them in the truck with the tailgate down.
    Name:  05c9cbffd9d48c44715da1b0fb9b3ff0.jpg
Views: 4
Size:  74.4 KB

    Name:  03aff134fbfdda7a7b57bd9ff6c8d3b1.jpg
Views: 3
Size:  88.3 KB

    Name:  85a091527a1fe2f5ea2a44c03d87ef66.jpg
Views: 4
Size:  86.3 KB

    Name:  e1fcb7df6535275cb1df1433dd39fd6d.jpg
Views: 1
Size:  89.0 KB
    "The only source of knowledge is experience." Albert Einstein

  • #2
    http://www.millerwelds.com/resources...ad.php?t=18743

    great space saving. I used receivers too. You can pack a lot of attachments in a small area when space is at a premium.

    Comment


    • #3
      Nice looking mounts pro70. I did the vise back in 96 and have been doing all my stuff like that since then. The initial reason was for portability to job sites, but it was such a space save I keep on doing it with other tools.
      "The only source of knowledge is experience." Albert Einstein

      Comment

      Working...
      X