Announcement

Collapse
No announcement yet.

PROJECT: Saving Some Money...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • PROJECT: Saving Some Money...

    Hey guys,
    A couple years ago, I had a job offer to make several thousand various size brackets for a fellow & a lot of future work. I did some web searching & found this Handi-Bend on one of the shop sites. You can see the price as it was then. Their unit could handle up to 10"W material. I didn't need anything that large, so I designed & fabbed mine to take up to 4" W material. I got into the residual cutoff pieces box & started digging for the material I needed. Yup....found it all. This project needs a lathe & mill, so if you don't have one, you'll have to find someone to trade some services for. The only parts I bought were the return springs. I have a couple projects I will post to show how useful this unit is & the ease to bend up to 1/4". Here's some pics.

    Denny
    Attached Files
    * Complete welding, machine, & fab shop *
    * Mobile unit *
    * Finally retired *
    ____________________________________________

    * A man's word is his honor..... without honor, there is nothing. *
    * Words are like bullets..... once they leave your muzzle, you cannot get them back. *
    * I have no reservation to kill nor hesitation to die for the U.S. Constitution & the American Flag. *
    * Age is a state of mind..... at my age, you cannot fathom what is in my mind. *

  • #2
    That looks similar to the unit Nick (Monte) made.
    Nick

    Comment


    • #3
      Nice work Denny,

      I like the design, I only wish I had a mill. But I don't so I am looking at everything I can find and going to try to take the best of each and get one made with out a mill.

      Denny, off the top of your head, whats the thickest you have bent so far?

      Tom

      Miller 211 A.S. and Spoolmate 100
      Stickmate LX 235 AC / 160 DC.
      Clarke 180 EN Just in case
      Spectrum 375 X-Treme.
      O/A Medium Radnor Torch, Large Victor Torch.
      Milwaukee 14" Chop Saw.
      4 x 6 Horizontal Band Saw.
      Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
      Jackson Passive shade #5 for the plasma.
      I almost forgot the Hobart XVP AD Hood.


      Projects and Misc Albums
      http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

      Comment


      • #4
        i made one of these after a guy posted a sticky on how to build one on yellowbullet...very handy and can be made for cheap especially if you have access to a lathe and mill...i have peanuts into mine...

        Comment

        Working...
        X