Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

PROJECT: Mini-Scroll Bender

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • PROJECT: Mini-Scroll Bender

    Hey guys,
    Here's a mini-bender I made that I keep in my mobile unit. It's made from a piece of 3"W X 1/4"T "C" channel with a vise lug welded to the bottom. I made it so I can slide the inner vertical post approx. 1" to adj. for thickness. It will also accomodate 4"W flat stock & I have bent 1/2" solid square with the O/A persuader. There are xtra tubes to slide over the fixed tubes to increase diameter. These are easy projects to make & will come in handy. Pics show the simpleness & ease to make.

    Denny
    Attached Files

  • #2
    Not a bad idea

    I made something similar basis but Iím not sure where it at this moment a Honey-Do project for the wife for bending and making spoon rings out of old silverware

    Looks like it bends well this forum is awesome and full of great ideas and craftsmanship


    CH!

    Comment

    Working...
    X
    Special Offers: See the latest Miller deals and promotions.