Announcement

Collapse
No announcement yet.

Fixing a Modified 2004 Cobra 4V intake

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Where does the aftercooler go after this is plated over? I was thinking it fit in the gap between the intake and the V of the block. Is this a turbo conversion with bumper mounted intercooler? Does a 2001ish intake fit? Might be a bolt-on conversion to the turbo and front mount intercooler. Might have to buy a different throttle body and who knows what else

    Dynasty200DX w/coolmate1
    MM210
    MM Vintage
    Lincoln AC225
    Victor O/A, Smith AW1A
    Cutmaster 81
    IR 2475N7.5FP
    Evolution Rage3
    Jancy USA101
    9" South Bend
    AEAD-200LE

    Comment


    • #17
      Originally posted by Andy View Post
      Where does the aftercooler go after this is plated over? I was thinking it fit in the gap between the intake and the V of the block. Is this a turbo conversion with bumper mounted intercooler? Does a 2001ish intake fit? Might be a bolt-on conversion to the turbo and front mount intercooler. Might have to buy a different throttle body and who knows what else

      The intercooler is the lower part of the intake. This is the upper I worked on.
      T.J.
      Miller Dynasty 300DX
      HTP MIG 240
      HTP 380 Plasma

      Bridgeport Milling Machine
      South Bend Lathe
      Etc. Etc....
      tjsperformance.com

      Comment


      • #18
        TJS
        I called Kinkos and they said they can scan a pattern and vectorize it in the AI files I need to cut it out. This is in KCMO area but I'll assume any Kinkos
        could do it. It's a $30 min and depending on how complex it may be more depending on time. If you have enough of these it would be worth them doing because they have large scanners and the proper software to do this correctly. Nick,
        Nick
        Miller 252 Mig
        Miller Cricket XL
        Millermatic 150 Mig
        Miller Syncrowave 200 Tig
        2-O/A outfits
        Jet Lathe and Mill
        Jet 7x12 horz/vert band saw
        DeWalt Multi Cutter metal saw
        Century 50 Amp Plasma Cutter
        20 ton electric/hydraulic vertical press
        Propane Forge
        60" X 60" router/plasma table

        www.youtube.com/watch?v=jTu7wicVCmQ
        Vist my site: www.nixstuff.com
        and check out some of my ironwork and other stuff

        Comment


        • #19
          Originally posted by monte55 View Post
          TJS
          I called Kinkos and they said they can scan a pattern and vectorize it in the AI files I need to cut it out. This is in KCMO area but I'll assume any Kinkos
          could do it. It's a $30 min and depending on how complex it may be more depending on time. If you have enough of these it would be worth them doing because they have large scanners and the proper software to do this correctly. Nick,
          I will check with Kinkos. They are clowns here but we will see. What does an AI file mean. What extension do I need to tell Kinkos I want.
          Thanks.
          T.J.
          Miller Dynasty 300DX
          HTP MIG 240
          HTP 380 Plasma

          Bridgeport Milling Machine
          South Bend Lathe
          Etc. Etc....
          tjsperformance.com

          Comment


          • #20
            See post #15
            Nick
            Miller 252 Mig
            Miller Cricket XL
            Millermatic 150 Mig
            Miller Syncrowave 200 Tig
            2-O/A outfits
            Jet Lathe and Mill
            Jet 7x12 horz/vert band saw
            DeWalt Multi Cutter metal saw
            Century 50 Amp Plasma Cutter
            20 ton electric/hydraulic vertical press
            Propane Forge
            60" X 60" router/plasma table

            www.youtube.com/watch?v=jTu7wicVCmQ
            Vist my site: www.nixstuff.com
            and check out some of my ironwork and other stuff

            Comment

            Working...
            X