I purchased a piece of 1/8" 36" x 48" and cut it down to 24" and another piece for an apron 5" tall. Welded it up and cleaned it off nice. I screwed it to my workbench under my vise. I also ran a grounding lug and cable to mount on the wall near my welders. Now the bench is always grounded as well as the vise is grounded. Tig pedal under the bench Voila! Works awesome. My only concern is its only 1/8" over two layers of plywood and a layer of Formica. I tack things right on the bench then raise them with metal blocks or angle iron so I dont really get the bench hot.
No announcement yet.