Announcement

Collapse
No announcement yet.

8"x8"x7' I Beam For Sale Or Trade

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 8"x8"x7' I Beam For Sale Or Trade

    8"x8"x7' I Beam For Sale Or Trade
    Let Me Know What You Have To Trade
    Or What You Want To Pay
    Brand New Beam
    RIDGEFIELD PARK NEW JERSEY
    Last edited by MYBOYDAVE; 10-27-2007, 08:08 PM.

  • #2
    Where are you and the beam located?
    Mike
    MD Welding & Fabricating L.L.C.
    mdwelding@sbcglobal.net

    Comment


    • #3
      8"x8"x7' I Beam For Sale Or Trade

      I take it this is "W" or wide flange beam, do you know what the lbs/ft is? If not can I can get the thickness of the flange and the web?
      Thanks

      Comment


      • #4
        8"x8"x7' I Beam For Sale Or Trade

        I also see you up near NYC do you have a good way to ship to S. Jersey?

        Comment


        • #5
          Originally posted by reggie
          7 FT WHATS IT ANY GOOD FOR..GARBAGE,GIVE IT AWAY...
          If you had to buy it you wouldn't consider it garbage. Fwiw I bought a 12' 8" 24 lb. per ft beam and it was $135 . A new 20ft 8" 24 lb per ft was $270.
          Dynasty 200DX "Blue Lightning"
          Bernard 3500ss water-cooler
          Rockwell vertical mill
          Beverly Shear B-3
          Beverly Shear JR
          Home-made English wheel
          Milwaukee Porta-band
          " Sawz-all
          Tennsmith 36" stomp shear
          Fixer upper 1968 Redface Lincoln sa200
          Powcon 300st

          Comment


          • #6
            Short lengths of I-Beam such as this are great for making heavy duty horses.

            Weld a couple lengths of channel on and use angle iron for the base and you're good to go.

            I have a couple that I use all the time for mounting a vice, a tubing roller, a pipe bender, etc. One is the same height as my welding table, which works great for larger pieces.

            Not useless, but reallly doesn't have much "commercial" value. I get my beams out of my buddy's scrap dumpster (runs a large fab shop).
            Syncrowave 250 DX Tigrunner
            Dynasty 200 DX
            Miller XMT 304 w/714D Feeder & Optima Control
            Miller MM 251 w/Q300 & 30A SG
            Hobart HH187
            Dialarc 250 AC/DC
            Hypertherm PM 600 & 1250
            Wilton 7"x12" bandsaw
            PC Dry Cut Saw, Dewalt Chop Saw
            Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
            Thermco and Smith (2) Gas Mixers
            More grinders than hands

            Comment


            • #7
              I have a piece like that with a vise on one end and a notcher on the other. Also if someone was looking to build a log splitter or a small gantry that would be perfect.
              Miller Syncrowave 180
              Miller 211 w/ spool-gun
              Lincoln AC/DC buzzbox
              Cutmaster 38 plasma
              Oxy/Acet torch
              DeWalt Multi-Cutter
              Fiber Metal Helmets(old school)
              Enough Snap-On to be a dealer.

              Comment


              • #8
                Originally posted by chrisa7164 View Post
                I have a piece like that with a vise on one end and a notcher on the other. Also if someone was looking to build a log splitter or a small gantry that would be perfect.
                Funny you should say that - just started looking last week for some to build a gantry to pull a cab and pickup box off of a frame. Too bad it's half a country away.....

                Comment


                • #9
                  Nominal 8" flange width could be 31-67 lbs per ft.

                  W8x31
                  W8x35
                  W8x40
                  W8x48
                  W8x58
                  W8x67

                  Not very specific, is it?

                  80% of failures are from 20% of causes
                  Never compromise your principles today in the name of furthering them in the future.
                  "All I ever wanted was an honest week's pay for an honest day's work." -Sgt. Bilko
                  "We are generally better persuaded by reasons we discover ourselves than by those given to us by others." -Pascal
                  "Since we cannot know all that there is to be known about anything, we ought to know a little about everything." -Pascal

                  Comment


                  • #10
                    I hevent seen a solid price tag yet.

                    Comment


                    • #11
                      Need one W8X48 load bearing steel supporting beam about 18 feet long in Edison, NJ

                      Need on W8X48 load bearing supporting, 18 feet long + bearing to be delivered in Edison, NJ

                      Comment


                      • #12
                        Look up steel suppliers near Edison, NJ. Try Samson Metals or Metals USA.
                        MM250
                        Trailblazer 250g
                        22a feeder
                        Lincoln ac/dc 225
                        Victor O/A
                        MM200 black face
                        Whitney 30 ton hydraulic punch
                        Lown 1/8x 36" power roller
                        Arco roto-phase model M
                        Vectrax 7x12 band saw
                        Miller spectrum 875
                        30a spoolgun w/wc-24
                        Syncrowave 250
                        RCCS-14

                        Comment

                        Working...
                        X