Announcement

Collapse
No announcement yet.

bully bar

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • bully bar

    ok i don't really know what category this would go in but im making a bully bar for my dodge spirit thats right i said a dodge spirit i was just wondering what u guys think of it and if u got any suggestion that would make it look cooler im making it just cuzz i can haha i got this car for my 16th b-day and ever since i felt like it was missing some thing im gona put ether 2,3 or 4 kc lights on it yea some of the measurements arnt right yet but i just did those while i was in the house not out under the car
    Attached Files

  • #2
    What?????????????????????????????????????????????? ?????/

    Comment


    • #3
      Originally posted by youngwelder View Post
      ok i don't really know what category this would go in but im making a bully bar for my dodge spirit thats right i said a dodge spirit i was just wondering what u guys think of it and if u got any suggestion that would make it look cooler im making it just cuzz i can haha i got this car for my 16th b-day and ever since i felt like it was missing some thing im gona put ether 2,3 or 4 kc lights on it yea some of the measurements arnt right yet but i just did those while i was in the house not out under the car
      Hi;
      What's a Bully Bar ?
      Nice Drawing, I dont know what is , but Nice Drawing !

      ............. Norm
      - Arcair- K 4000 CAC.
      - LN - 25
      - Lincoln Ranger 8
      -DeWalt Compressor

      www.normsmobilewelding.blogspot.com

      Comment


      • #4
        It's a "push bar"--"grill guard" for the front of the car.
        MM250
        Trailblazer 250g
        22a feeder
        Lincoln ac/dc 225
        Victor O/A
        MM200 black face
        Whitney 30 ton hydraulic punch
        Lown 1/8x 36" power roller
        Arco roto-phase model M
        Vectrax 7x12 band saw
        Miller spectrum 875
        30a spoolgun w/wc-24
        Syncrowave 250
        RCCS-14

        Comment


        • #5
          Bull Nose

          Weld it up, my young Jedi. Document it as you go. Piece by piece, step by step and post it on here for all to see. Very few will have negative things to say. I applaud you for giving it a go.

          You may even think about adding a guard on the bottom to help protect your radiator and trans. Take a look at som that are being built by other fabrication companies like Ranch Hand and Tough Guard. Good luck with your project
          Mustangs Forever!

          Miller equipment.

          Comment


          • #6
            haha

            yea i looked at some pics and im not realy gona go off roading with the car the bully bars just for looks right now im gona take some pics as i make it proboly this thursday

            Comment


            • #7
              Bull bars

              I don't know where you came up with bully, but that's why no one knows what you're talking about.

              http://www.google.com/products?sourc...ed=0CDwQrQQwAg
              Syncrowave 250DX
              Invison 354MP
              XR Control and 30A

              Airco MED20 feeder
              Thermal Dynamics Cutmaster 81
              Smith O/A rig
              And more machinery than you can shake a 7018 rod at

              Comment


              • #8
                A bully is a bad dude at school or a breed of dog.
                Kemppi Pro Evolution 4200
                Kemppi 530 wire feed with MXE panel
                Kemppi ProCool ( coming soon)
                Cigweld TransMig 210se
                Cigweld TransTig 200 AC/DC
                Hypertherm PowerMax45
                CutSkill O/A setup
                Speedglas 9000x adflow
                Speedglas 9100xx

                Comment


                • #9
                  Originally posted by LarryO View Post
                  A bully is a bad dude at school or a breed of dog.
                  What if the bully is in a bar?
                  Caution!
                  These are "my" views based only on “my” experiences in “my” little bitty world.

                  Comment


                  • #10
                    Originally posted by Sonora Iron View Post
                    What if the bully is in a bar?
                    bad dog no biscuit

                    Sorry, couldn't help myself

                    Jay

                    Comment


                    • #11
                      Originally posted by Sonora Iron View Post
                      What if the bully is in a bar?
                      A bully bar is probably one that i would stay out of, especially if the bullies are drunk...
                      Millermatic 211
                      Everlast 200DX TIG
                      Lincoln Weld-Pak 100
                      Century Stick welder
                      Hypertherm Powermax 30 plasma cutter
                      Oxy set-up with Henrob 2000 torch
                      Logan 200 lathe (60 years old)
                      Jet band saw

                      Comment


                      • #12
                        you making a road ralley car or a driver with attitude and lights ?

                        Comment


                        • #13
                          Bully Bar

                          http://www.google.com/m/search?oe=UT...&cd=6&resnum=6

                          Nick

                          Comment


                          • #14
                            Nick has successfully proven that 8 people on earth call it the wrong term.
                            Syncrowave 250DX
                            Invison 354MP
                            XR Control and 30A

                            Airco MED20 feeder
                            Thermal Dynamics Cutmaster 81
                            Smith O/A rig
                            And more machinery than you can shake a 7018 rod at

                            Comment


                            • #15
                              No, he just proved that Fishy Jim was wrong!

                              Here is a better link for you, it looks like there are almost a milliion hits for it.

                              http://images.google.com/images?hl=e...ed=0CC0QsAQwBQ
                              Last edited by walker; 01-12-2010, 03:06 PM.

                              Comment

                              Working...
                              X