Announcement

Collapse
No announcement yet.

Head Ache Rack on a Budget

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    that is some very nice work.

    Comment


    • #32
      Originally posted by TJS View Post
      Hehe. This is what I stated in my first post.


      TOP Cut: 108*
      But this is a compound miter cut on 2 separate pieces so 108/2=54* but you
      need to subtract from the included angle which is 90, so 90*-54* = 36*, thus
      both pieces will require a cut of 36*.
      ___________
      72* / 108*
      /
      /
      /
      108*/__72*

      Bottom Cut: 90*(included angle)-72*=18*(this is what the bottom tube is cut to)
      TJS; Hello, I stand corrected.
      You are correct, the top is 36* each cut . Sorry bout that !

      One more thing, You Know where you can stick your, he,he, he !
      The best & most simple way is , what ever your upright angle is just divide it in Half !
      72*= 36*, 80*=40, 60*=30*, etc., etc .

      ........... Norm
      Last edited by nfinch86; 01-05-2010, 03:55 PM.
      - Arcair- K 4000 CAC.
      - LN - 25
      - Lincoln Ranger 8
      -DeWalt Compressor

      www.normsmobilewelding.blogspot.com

      Comment


      • #33
        That's an awesome headache rack. You never could have bought one nearly as nice as that one. It's top notch in my book!
        Blondie (Owner C & S Automotive)

        Colt the original point & click interface!

        Millermatic 35 with spot panel
        Miller 340A/BP
        Victor O/A torches
        Lincoln SP125
        Too many other tools to list

        03 Ram 1500
        78 GS1000
        82 GL1100 Interstate

        Comment

        Working...
        X