Announcement

Collapse
No announcement yet.

Head Ache Rack on a Budget

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    good job
    im going to be doing something like that on a friend of mine's truck soon
    im also maken it a dumpbed its going to be fun
    good job thanks for all the pics

    Comment


    • #17
      Originally posted by TJS View Post
      Machined the plates for the stake pocket and also did more simple geometry for the miter cut for the top piece. I mocked it up with wood. The digital level reads in 10ths. So you really can't get more level than that. Yay my math worked. Here are some pics. And, I still only have 40 bucks into this thing.
      T.J.







      I was going to ask you why you didn't just use the plasma cutter to make the cutouts, but then i popped over to check out your website, and thought "ah hah, he sure does like precise, quality work." That is some nice work done at your shop.
      Millermatic 211
      Everlast 200DX TIG
      Lincoln Weld-Pak 100
      Century Stick welder
      Hypertherm Powermax 30 plasma cutter
      Oxy set-up with Henrob 2000 torch
      Logan 200 lathe (60 years old)
      Jet band saw

      Comment


      • #18
        Well that looks good

        Comment


        • #19
          Originally posted by Joe from N.Y. View Post
          I was going to ask you why you didn't just use the plasma cutter to make the cutouts, but then i popped over to check out your website, and thought "ah hah, he sure does like precise, quality work." That is some nice work done at your shop.

          Thanks, but that is not my shop, all the work done is at my house in my garage. I consider myself lucky.
          T.J.
          Miller Dynasty 300DX
          HTP MIG 240
          HTP 380 Plasma

          Bridgeport Milling Machine
          South Bend Lathe
          Etc. Etc....
          tjsperformance.com

          Comment


          • #20
            Nice job. If anyone noticed in the finished pic he used a chain link welded to each upright on the bed side to tie stuff to. These are cheap & work great. Always a good idea to add acouple to a project like this.
            MM250
            Trailblazer 250g
            22a feeder
            Lincoln ac/dc 225
            Victor O/A
            MM200 black face
            Whitney 30 ton hydraulic punch
            Lown 1/8x 36" power roller
            Arco roto-phase model M
            Vectrax 7x12 band saw
            Miller spectrum 875
            30a spoolgun w/wc-24
            Syncrowave 250
            RCCS-14

            Comment


            • #21
              Originally posted by TJS View Post
              This is a budget build as the title states. I am using the scrap I have laying around. I have spent so far $0.00 to this point. I machined the mouting plate for the light bar (no pics). I cut the uprights out of 4x2 rect. 10gauge. I also cut the mounting plates for the bed. I had all this steel laying around. I already have the expanded metal (cage) to protect the glass laying around. I need to get a few feet of more 4x2 and some 3" flat. Here are some pics of what I have done so far.


              I was able to find the angle of the cab with this great tool. Digital anlgle finder.



              Then I cut calculated how high I want this thing to be and cut the uprights to the proper angle. Remember you are cutting from 90 degress. I wanted the uprights to be at 72 degrees so I made the cut at 18 degrees.



              Here is the upright.




              These are the 12x5x 1/4" base plate. Notice the holes in this stuff, again more scrap. These plates cover up the front stake pockets. So I will machine a hole in them so I do not loose the functionality of the stake pockets.


              T.J.
              I really appreciated your explanation of the process of finding the cut angle for the uprights.Can you tell me what the cut angle for the top of the uprights were? Thanks Mike

              Comment


              • #22
                Originally posted by crawdaddy View Post
                I really appreciated your explanation of the process of finding the cut angle for the uprights.Can you tell me what the cut angle for the top of the uprights were? Thanks Mike
                I really cannot remember as I write all the stuff down on my steel bench and then clean it off. But using angles: If the angle on the truck bed up right is 72 degrees then the opposite should be 108 degrees. 72 + 108=180.

                However this means that each of the angles for the top piece should be
                108/2=54 degrees each, but you are calculating from the included angle which is 90. So 90 54 =36 degrees. I think this is what I cut them for. This is why I did it in wood first.
                T.J.
                Miller Dynasty 300DX
                HTP MIG 240
                HTP 380 Plasma

                Bridgeport Milling Machine
                South Bend Lathe
                Etc. Etc....
                tjsperformance.com

                Comment


                • #23
                  Thanks for the reply, Laying out & calculating angles is an area were I could use improvement.Mike

                  Comment


                  • #24
                    Originally posted by TJS View Post
                    I really cannot remember as I write all the stuff down on my steel bench and then clean it off. But using angles: If the angle on the truck bed up right is 72 degrees then the opposite should be 108 degrees. 72 + 108=180.

                    However this means that each of the angles for the top piece should be
                    108/2=54 degrees each, but you are calculating from the included angle which is 90. So 90 54 =36 degrees. I think this is what I cut them for. This is why I did it in wood first.
                    T.J.
                    Hey guys;

                    Truck bed upright = 72 Deg.
                    Bottom cut = 90Deg. - 72deg. = 18deg.
                    Top cut ( compound angle ) = 18 deg. + 18 deg. = 36 deg.

                    Same Result, Different route !

                    ........... Norm
                    - Arcair- K 4000 CAC.
                    - LN - 25
                    - Lincoln Ranger 8
                    -DeWalt Compressor

                    www.normsmobilewelding.blogspot.com

                    Comment


                    • #25
                      Truck Rack Project

                      T.J.,

                      Your project has got to be the best documented, photographed, and explained project I have ever viewed on this site!

                      You took the time to show every detail. You are indeed a very well qualified craftsman!

                      I enjoyed viewing the progress and reading your notes on how everything went together.

                      Congratulations! Excellent work!

                      Steve

                      Comment


                      • #26
                        Originally posted by nfinch86 View Post
                        Hey guys;

                        Truck bed upright = 72 Deg.
                        Bottom cut = 90Deg. - 72deg. = 18deg.
                        Top cut ( compound angle ) = 18 deg. + 18 deg. = 36 deg.

                        Same Result, Different route !

                        ........... Norm
                        Hi Norm,So for the top cut is the upright cut at 18 deg and the horizontal matching piece cut at 18 deg for a total of 36 deg? I just want to be clear.Thanks Mike

                        Comment


                        • #27
                          Crawdaddy Hi;

                          Yes, The Bottom cut is at 18* to give you a 72* angle on the Upright !
                          On the Top cut each One @ 18* to give you 180* or Horizontal ! ( 36* Compound Angle )

                          Crawdaddy, in otherwards you make Three Cuts @ 18* Each , That's Per Side of the rack !

                          .............. Norm :
                          Last edited by nfinch86; 01-05-2010, 05:07 AM.
                          - Arcair- K 4000 CAC.
                          - LN - 25
                          - Lincoln Ranger 8
                          -DeWalt Compressor

                          www.normsmobilewelding.blogspot.com

                          Comment


                          • #28
                            Thanks Norm.Mike

                            Comment


                            • #29
                              Originally posted by nfinch86 View Post
                              Crawdaddy Hi;

                              Yes, The Bottom cut is at 18* to give you a 72* angle on the Upright !
                              On the Top cut each One @ 18* to give you 180* or Horizontal ! ( 36* Compound Angle )

                              Crawdaddy, in otherwards you make Three Cuts @ 18* Each , That's Per Side of the rack !

                              .............. Norm :
                              Norm, You better go back to school as your dimensions don't work! If you cut them all at 18* then the top bar would be pointed up in the air as you only have a total of 54*. If the bottom cut was 18* then the total degrees needed at the top for a 90 is 72* which is 90* less 18* = 72*. So you would cut the top of the upright at 36* & the end of the cross bar at 36*. Adding it all up would give you 90 degrees. This would be for one side.
                              Last edited by MMW; 01-05-2010, 07:57 AM.
                              MM250
                              Trailblazer 250g
                              22a feeder
                              Lincoln ac/dc 225
                              Victor O/A
                              MM200 black face
                              Whitney 30 ton hydraulic punch
                              Lown 1/8x 36" power roller
                              Arco roto-phase model M
                              Vectrax 7x12 band saw
                              Miller spectrum 875
                              30a spoolgun w/wc-24
                              Syncrowave 250
                              RCCS-14

                              Comment


                              • #30
                                Originally posted by MMW View Post
                                Norm, You better go back to school as your dimensions don't work! If you cut them all at 18* then the top bar would be pointed up in the air as you only have a total of 54*. If the bottom cut was 18* then the total degrees needed at the top for a 90 is 72* which is 90* less 18* = 72*. So you would cut the top of the upright at 36* & the end of the cross bar at 36*. Adding it all up would give you 90 degrees. This would be for one side.

                                Hehe. This is what I stated in my first post.


                                TOP Cut: 108*
                                But this is a compound miter cut on 2 separate pieces so 108/2=54* but you
                                need to subtract from the included angle which is 90, so 90*-54* = 36*, thus
                                both pieces will require a cut of 36*.
                                ___________
                                72* / 108*
                                /
                                /
                                /
                                108*/__72*

                                Bottom Cut: 90*(included angle)-72*=18*(this is what the bottom tube is cut to)
                                Miller Dynasty 300DX
                                HTP MIG 240
                                HTP 380 Plasma

                                Bridgeport Milling Machine
                                South Bend Lathe
                                Etc. Etc....
                                tjsperformance.com

                                Comment

                                Working...
                                X