Announcement

Collapse
No announcement yet.

Filler metal rack

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Filler metal rack

    Hi everyone, this will be the first time posting here. Thought I would share some pictures of the Filler Metal holder I just made out of pine and PVC. I'm a long time mig welder and just recently purchased a 300DX which I am in the process of learning how to use, so far so good.
    Attached Files

  • #2
    Very impressive, I have mine in PVC also ... but they are just leaning against the wall Oh yeah, welcome
    Regards, George

    Hobart Handler 210 w/DP3035 - Great 240V small Mig
    Hobart Handler 140 - Great 120V Mig
    Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

    Miller Dynasty 200DX with cooler of my design, works for me
    Miller Spectrum 375 - Nice Cutter

    Comment


    • #3
      Hi Hotrod

      Just joined a couple of weeks ago and also just purchased my first tig too. I've been trying to think of how I want store my rods and I really like your Idea. I think I'm going to Home Depot to get some material tonight. Thanks for sharing.

      Frank
      www.wmauto.com

      www.walshoriginals.com

      www.seabeastart.com

      http://members.fotki.com/Bart1971/about/

      Comment


      • #4
        The inside story,,,,,,,,,
        Attached Files

        Comment


        • #5
          Is that painted? or laminate

          Comment


          • #6
            Rust-Oleum --- Sail Blue,,,,,

            Comment


            • #7
              Great idea, ill add it to my list
              AIM: Zachary188

              Comment


              • #8
                I dont mean to muscle in or anything but I thought this might be a good spot to show mine. Its not really a storage type like youres, its more for of a holder for them while welding. It was actually my first tig project, its built out of a bunch of scrap and some 1 1/4" EMT. If you look closely at the top of the tray there is a carrying handle that folds down on the tray. Also the tubes will lift out for cleaning or if you drop a short peice down the tube.
                To all who contribute to this board.
                My sincere thanks , Pete.

                Pureox OA
                Westinghouse 300 amp AC stick
                Miller Syncrowave 250
                Hexacon 250 watt solder iron

                Comment


                • #9
                  Whoops , forgot the picture.
                  Attached Files
                  To all who contribute to this board.
                  My sincere thanks , Pete.

                  Pureox OA
                  Westinghouse 300 amp AC stick
                  Miller Syncrowave 250
                  Hexacon 250 watt solder iron

                  Comment


                  • #10
                    Hey Pete, I was just practicing welding today and said to myself where am I going to put all these short pieces? I quess I will get a separte tube to put them all in, I like the idea of the portable rack you designed, I will definitly need to make something like that down the road,

                    Comment


                    • #11
                      Very nice and clean design.Also welcome aboard.

                      Comment


                      • #12
                        here is my cousin`s tig wire holder on his syncowave 250,i did some of the welds on it each pipe holdes 4 differnt sizes , 1 for carbon , 1 for ss, 1 for aluim ,


                        HOTRODWILLYS i like that may have to make one like it for my stick rods when i get my Stickmate!

                        Inferno Forge

                        Chris

                        Comment


                        • #13
                          VERY nice job guys! Pete, won't you want it covered to decrease the chance of dirt and oxidation?
                          I'm not late...
                          I'm just on Hawaiian Time

                          Comment


                          • #14
                            OPPS sorry y`all I forgot the pic.
                            Attached Files

                            Inferno Forge

                            Chris

                            Comment

                            Working...
                            X