Announcement

Collapse
No announcement yet.

First project after buying a MM211

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by haroldmulder View Post
    Thanks for the points. I thought about coating the wood with a thin veneer of metal and may still do that down the road. However I will need to find a cheap material since when I was in some of the box stores the price of thin gauge metal was outrageous. ...
    Man, just go to your local autobody repair shop. grab an old car hood or trunk out of his dumpster. cut/grind off the braces,. and you have a great source of sheet metal, free. Great stuff to practice with also.
    Millermatic 211
    Everlast 200DX TIG
    Lincoln Weld-Pak 100
    Century Stick welder
    Hypertherm Powermax 30 plasma cutter
    Oxy set-up with Henrob 2000 torch
    Logan 200 lathe (60 years old)
    Jet band saw

    Comment


    • #17
      First project

      Might just try that especially since my 6month old F150 is going into the body shop to be repaired after I was rear ended visiting my Grandmother a month ago. Since they are replacing a side panel on the box I should have plenty of practice material out of that. Any way thanks for the idea.
      All the best.
      Harold Mulder

      Millermatic 211 MVP
      HTP Invertig 201 with water cooler

      Comment

      Working...
      X