Announcement

Collapse
No announcement yet.

Aluminum stair rail mount

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aluminum stair rail mount

    Hy, this whas the last project a finish build and install this week for a client who has purchased a machine 40 feet long and forms cigarette tube. The rails and stands was weld whit my LN-25 mig and the stair whit spoolmatic 30a.
    Im too ***y for my XMT
    Attached Files
    XMT 304 cc/cv 208/480 volts
    Lincoln wire feeder LN-25 w/Contactor and Gas Solenoid, w/magnum 400 and 200 gun's (12 ft)
    Spoolmatic 30a w/Flex Head tube 10'' XRA
    Flexible Head Tig Torch w/Gas Valve (25 ft)
    Foot Control RFCS-14HD
    Side-to-side rotary-motion fingertip Current Control
    Miller process Selector Control w/external solenoid valve
    Stainless steel welding cart
    Makita LC1230 Dry cut saw
    sigpic
    www.ricau.ca

  • #2
    Very nice...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      Nice work! How thick are the channels for the stairs? Did you bend them yourself, or have them bent?
      Diversion 165
      Lincoln SP175T
      Ryobi Drill Press
      No Name Portable band and chop saws
      '97 Triumph Trophy 900 (3 cylinder, hence Triple!)

      Comment


      • #4
        Aluminum Stair Rail

        Alum. Stairs looks real nice Like the diamond plate Really sets it off. Well great job again
        Vernon

        Comment


        • #5
          Originally posted by TripleTrophy View Post
          Nice work! How thick are the channels for the stairs? Did you bend them yourself, or have them bent?
          Tank's TripleTrophy,
          I used a designer and lazer cutting, and folding for the amounts and stairs. The material was 3/16'' thick whit a tubing 1''x1''x 1/8 thick weld under the front stair.
          ciao

          Ricau
          XMT 304 cc/cv 208/480 volts
          Lincoln wire feeder LN-25 w/Contactor and Gas Solenoid, w/magnum 400 and 200 gun's (12 ft)
          Spoolmatic 30a w/Flex Head tube 10'' XRA
          Flexible Head Tig Torch w/Gas Valve (25 ft)
          Foot Control RFCS-14HD
          Side-to-side rotary-motion fingertip Current Control
          Miller process Selector Control w/external solenoid valve
          Stainless steel welding cart
          Makita LC1230 Dry cut saw
          sigpic
          www.ricau.ca

          Comment


          • #6
            I like it. Looks like you got a little time in it. Just one thing how much is that worth.

            Comment


            • #7
              beautiful work. Also wondering if you don't mind me asking how much would a project like that run?
              Miller syncrowave 200 runner with coolmate 4
              and wp2025 weldcraft torch
              Miller 125c plasma cutter

              Comment


              • #8
                Very nice.
                How was the warping?
                Tres tres beau mon garcon.

                Comment


                • #9
                  Tank's Daniel for asking becose yes, there was a risk for warping. But im very concern about it when a weld something and sometime try to play whit it! For this assembling, each step receve one inch of weld at the time after which are blocked, and a was not needed to straighten them after.

                  Salut
                  XMT 304 cc/cv 208/480 volts
                  Lincoln wire feeder LN-25 w/Contactor and Gas Solenoid, w/magnum 400 and 200 gun's (12 ft)
                  Spoolmatic 30a w/Flex Head tube 10'' XRA
                  Flexible Head Tig Torch w/Gas Valve (25 ft)
                  Foot Control RFCS-14HD
                  Side-to-side rotary-motion fingertip Current Control
                  Miller process Selector Control w/external solenoid valve
                  Stainless steel welding cart
                  Makita LC1230 Dry cut saw
                  sigpic
                  www.ricau.ca

                  Comment

                  Working...
                  X