Announcement

Collapse
No announcement yet.

Small Circle Burner For Torch......

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Small Circle Burner For Torch......

    A Circle Burner For My Victor Torch. Burns 1/2" To 9" Holes Easy To Use I Can Cut Perfect Circle. Can Remove In Min. And Go Back On To Cut Same Size Hole As Before Works Off A Center Point.I wanted Something Lite.I Took A Split Set Collar And Tig It To A Pcs Of Flat Bar Than Milled A Slot Long Ways In The Flat Bar.Than Bent The Rear Up To Fork It Around The Torch. Than Took A Pcs Of 1/4" Round To Make Pivot Point, Threaded For Two Nuts. Than Made Off Setting Leg In 1/4" Pcs. Check The Pic
    Vernon
    Attached Files

  • #2
    i like that

    Comment


    • #3
      So do I!!!
      Blondie (Owner C & S Automotive)

      Colt the original point & click interface!

      Millermatic 35 with spot panel
      Miller 340A/BP
      Victor O/A torches
      Lincoln SP125
      Too many other tools to list

      03 Ram 1500
      78 GS1000
      82 GL1100 Interstate

      Comment


      • #4
        very nice work, great idea, from the looks of it i bet the cuts come out perfect

        Comment


        • #5
          torch circle cutter

          Nice job Dude, looks professional!
          Professional firefighter (retired). Amateur everything else I try to do...
          Oh yeah: GO BIG RED!

          Comment


          • #6
            dose it only cut one size hole or can it be set for diffrent sizes

            Comment


            • #7
              If you look at the second pic it is slotted so you can move the pivot for different size holes & then tighten it with the two nuts. These type of circle burners give a very nice accurate cut. Been using a similar one for years.
              MM250
              Trailblazer 250g
              22a feeder
              Lincoln ac/dc 225
              Victor O/A
              MM200 black face
              Whitney 30 ton hydraulic punch
              Lown 1/8x 36" power roller
              Arco roto-phase model M
              Vectrax 7x12 band saw
              Miller spectrum 875
              30a spoolgun w/wc-24
              Syncrowave 250
              RCCS-14

              Comment


              • #8
                Cirle Burner

                Originally posted by m.k.swelding View Post
                dose it only cut one size hole or can it be set for diffrent sizes
                --------------------------------------------------------------------------------

                A Circle Burner For My Victor Torch. Burns 1/2" To 9" And Everthing In Between By Unlock 1/4" Nuts You Can Slide The Pivot Point Forward And Backwards Or Any Thing Between.

                Comment


                • #9
                  Thank You

                  Originally posted by MMW View Post
                  If you look at the second pic it is slotted so you can move the pivot for different size holes & then tighten it with the two nuts. These type of circle burners give a very nice accurate cut. Been using a similar one for years.
                  I like how you explained it. Vernon

                  Comment


                  • #10
                    My Drawling for circle burner

                    Here is the blue print I made to build the circle burner.
                    Attached Files

                    Comment


                    • #11
                      Cool drawing. Did you do that freehand?
                      MM250
                      Trailblazer 250g
                      22a feeder
                      Lincoln ac/dc 225
                      Victor O/A
                      MM200 black face
                      Whitney 30 ton hydraulic punch
                      Lown 1/8x 36" power roller
                      Arco roto-phase model M
                      Vectrax 7x12 band saw
                      Miller spectrum 875
                      30a spoolgun w/wc-24
                      Syncrowave 250
                      RCCS-14

                      Comment


                      • #12
                        Drawling

                        Originally posted by MMW View Post
                        Cool drawing. Did you do that freehand?
                        Yes I used a ruler and a pencil is that freehand! Drawling took about 3 to 4 hours, But made the job faster having it to scale and knowing what I wanted.
                        Thanks Vernon
                        Last edited by Vernon; 11-26-2009, 08:41 AM.

                        Comment

                        Working...
                        X