Announcement

Collapse
No announcement yet.

Some of my projects

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    The "rivets" and strapping are a nice touch. It really gives it a finished the look IMHO. Nice work
    DYNASTY 200SD
    COOLMATE 1
    MM140AS
    SPOOLMATE 100
    SPECTRUM 625 X-TREME
    SPECTRUM 125C

    Comment


    • #17
      No side door on the firebox, just 5 1" holes

      Comment


      • #18
        More yard art, and a different view of the orange flowers, I added some to the backside ( It kinda looked empty from my neighbors side of the fence)

        The orange flowers are 14ga formed over an old log ( Since I don't have an anvil yet )

        The yellow, pink, and green things will be in a group someday, with about 5-6 more, Hopefully with 1-2 taller than the green one ( It is only 12 ft tall ) They are made of 1/8" plate, they are all three sided, I like trying to bend the compound curves.

        The butterfly is 1/4" plate, cut with an oxy/propane torch ( Wish I had a Plasma ) Can't wait till tax refund time.

        Been cleaning the garage all day, looking through the junk piles for something else to build. Lots of junk to look at, I run a crane in a steel mill scrap yard, I see so much useable stuff, most of it ends up in the furnace.
        Attached Files

        Comment


        • #19
          Oups, some of the pics are too big, I will try to resize them

          Comment


          • #21
            What was the BBQ originally made from?
            Don
            Scottsdale, AZ
            www.savagesun4x4.com

            MillerMatic 211 AS
            Hypertherm PowerMax30
            Bernard 300 Amp Q Gun
            Bernard 200 Amp Q Gun
            Milwaukee Band-saw/stand
            10 Angle Grinders 8, 4 1/2" -2, 7"
            DeWalt Chop Saw
            Craftsman Twin-Blade Saw
            12 Ton Shop Press
            Optrel Satellite Helmet
            Miller Elite Helmet
            sigpic

            Comment


            • #22
              I used one 100lb propane tank, and two 20lb tanks

              Comment


              • #23
                Originally posted by bubba9459 View Post
                The rings were rolled in my homemade ring roller, which is still a work in progress.
                That I'd like to see! We have a couple of big ones at the shop but nothing small or garage sized.
                Blondie (Owner C & S Automotive)

                Colt the original point & click interface!

                Millermatic 35 with spot panel
                Miller 340A/BP
                Victor O/A torches
                Lincoln SP125
                Too many other tools to list

                03 Ram 1500
                78 GS1000
                82 GL1100 Interstate

                Comment

                Working...
                X