Announcement

Collapse
No announcement yet.

Tig Table Sit Dow Plans any on got a good one

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mountain Metal
    started a topic Tig Table Sit Dow Plans any on got a good one

    Tig Table Sit Dow Plans any on got a good one

    Looking for a good sit down tig table approx 2X4 feet. I have some ideas, post some pics with your tables any size.

  • Mountain Metal
    replied
    Any more pictures or ideas?

    Leave a comment:


  • Mountain Metal
    replied
    Thanks for the responses, some good ideas for sure. I have a monster roller what I am looking for is a strong light desk type so I can get my legs under it again Palongee has great table.

    This My big Roller
    Attached Files

    Leave a comment:


  • UH60LCHIEF
    replied
    Originally posted by Hardrock40 View Post
    Now thats a nice table.

    Has anyone tried the table Northen Tool sells?

    http://www.northerntool.com/webapp/w...2949_200342949

    For Tig in a small shop, I like the looks of it. Folds up, and can be used in different positions. I'd like to get one but the stores don't carry it so that means paying for it before you see it.

    Just wondering if it's worth the price.
    I bought one of those from Airgas here in San Diego. It's lightweight but it works okay. I still want to build a workbench though.

    Leave a comment:


  • Hardrock40
    replied
    That is very nice. I need to find myself a good table. I'm gona have to have an outside table for stick also.

    Leave a comment:


  • mikee
    replied
    Nice...... thanks for sharing

    mike

    Leave a comment:


  • Vernon
    replied
    Originally posted by m.k.swelding View Post
    I like the table. only one problem that I would have with it i need to have room to walk all the way around.
    Could be out in the middle of floor just don't have alot of room in my small shop.
    Vernon

    Leave a comment:


  • palongee1
    replied
    thanks

    Thanks for the comments! The table has worked out very nicely. I would have like to have drilled and bolted the top on but I opted to weld it, I made probably a dozen small welds on the underside here and there, I did make small welds with the thought of removing it down the road if I ever needed to. I had a nice stool and 34" to the top is what I came up with that would be a comfortable and usable height. The top was already cut, so I built the table around the piece that I found. Im still lacking a torch holder, ill get to that eventually. Heres a pic of my big table, its been really handy as well. If you would like measurements, ill hook you up! Thanks. Mike
    Attached Files

    Leave a comment:


  • mikee
    replied
    Nice Table Palongee

    I would like to duplicate your design and make a similar table for my shop. I too, am just learning to TIG and need a sit down place to weld. You did a beautiful job from what I can see..... (I have the same floor problem, nothing level)

    I do have a couple of questions. How did you attach the top, and just out of curiosity, why did you make it 34" tall?

    thanks for sharing,

    mike

    Leave a comment:


  • m.k.swelding
    replied
    Originally posted by Vernon View Post
    hey,
    Here is a picture of my bench if you want a close up let me know Hope this helps you or maybe just a good ideal. Vernon
    I like the table. only one problem that I would have with it i need to have room to walk all the way around.

    Leave a comment:


  • palongee1
    replied
    Nice...

    Nice Table Vernon! Big AZZ... I like it. Hey how does that little blast cabinet work? Ive been thinking about getting one for little parts here and there..
    Mike

    Leave a comment:


  • Vernon
    replied
    bench

    hey,
    Here is a picture of my bench if you want a close up let me know Hope this helps you or maybe just a good ideal. Vernon
    Attached Files

    Leave a comment:


  • Mountain Metal
    replied
    Palongee

    That is a really nice table that is very close to what I had in mind.

    Leave a comment:


  • Blondie_486
    replied
    Mine isn't done yet. Of course my stuff always waits till last, paying customers come first in this business. It won't be anything fancy just a functional table, I'm thinking of salvaging a table that's been given to me and updating it a bit with a new top and a coat of fresh paint.

    Leave a comment:


  • Hardrock40
    replied
    Now thats a nice table.

    Has anyone tried the table Northen Tool sells?

    http://www.northerntool.com/webapp/w...2949_200342949

    For Tig in a small shop, I like the looks of it. Folds up, and can be used in different positions. I'd like to get one but the stores don't carry it so that means paying for it before you see it.

    Just wondering if it's worth the price.

    Leave a comment:

Working...
X