Announcement

Collapse
No announcement yet.

Tig Table Sit Dow Plans any on got a good one

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tig Table Sit Dow Plans any on got a good one

    Looking for a good sit down tig table approx 2X4 feet. I have some ideas, post some pics with your tables any size.
    Mountain Metal
    Dynasty 200 DX
    Coolmate 1
    Miller Trailblazer 302 W/ Kohler
    Miller Suitcase 12VS Wire feeder
    Weldcraft 26 TIG Torch
    Miller 210
    Spoolmate 3035
    Thermal Dynamics 51 Plasma
    Victor O/A
    Jet 7x12 L Cooled Band Saw
    Delta Drill Press
    Dewalt Chop

  • #2
    Don't put a lower brace across the front so you have room for your feet & the pedal underneath.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      Yep I want a desk type configuration.
      Mountain Metal
      Dynasty 200 DX
      Coolmate 1
      Miller Trailblazer 302 W/ Kohler
      Miller Suitcase 12VS Wire feeder
      Weldcraft 26 TIG Torch
      Miller 210
      Spoolmate 3035
      Thermal Dynamics 51 Plasma
      Victor O/A
      Jet 7x12 L Cooled Band Saw
      Delta Drill Press
      Dewalt Chop

      Comment


      • #4
        Table

        Heres mine, its a 3' by 4' top using 1/4" plate, I would have liked thicker but the price was right. Plenty of room underneath for my feet. Its 34" from the floor the the top, I made the legs adjustable cause my shop floor is badly out of level. The box tubing is 1- 1/2" .095. I can take measurements in detail if you like. I tiggd the whole thing, figured it would be good practice since I was just learning...it was definitely! Mike
        Attached Files

        Comment


        • #5
          Now thats a nice table.

          Has anyone tried the table Northen Tool sells?

          http://www.northerntool.com/webapp/w...2949_200342949

          For Tig in a small shop, I like the looks of it. Folds up, and can be used in different positions. I'd like to get one but the stores don't carry it so that means paying for it before you see it.

          Just wondering if it's worth the price.

          Comment


          • #6
            Mine isn't done yet. Of course my stuff always waits till last, paying customers come first in this business. It won't be anything fancy just a functional table, I'm thinking of salvaging a table that's been given to me and updating it a bit with a new top and a coat of fresh paint.
            Blondie (Owner C & S Automotive)

            Colt the original point & click interface!

            Millermatic 35 with spot panel
            Miller 340A/BP
            Victor O/A torches
            Lincoln SP125
            Too many other tools to list

            03 Ram 1500
            78 GS1000
            82 GL1100 Interstate

            Comment


            • #7
              Palongee

              That is a really nice table that is very close to what I had in mind.
              Mountain Metal
              Dynasty 200 DX
              Coolmate 1
              Miller Trailblazer 302 W/ Kohler
              Miller Suitcase 12VS Wire feeder
              Weldcraft 26 TIG Torch
              Miller 210
              Spoolmate 3035
              Thermal Dynamics 51 Plasma
              Victor O/A
              Jet 7x12 L Cooled Band Saw
              Delta Drill Press
              Dewalt Chop

              Comment


              • #8
                bench

                hey,
                Here is a picture of my bench if you want a close up let me know Hope this helps you or maybe just a good ideal. Vernon
                Attached Files

                Comment


                • #9
                  Nice...

                  Nice Table Vernon! Big AZZ... I like it. Hey how does that little blast cabinet work? Ive been thinking about getting one for little parts here and there..
                  Mike

                  Comment


                  • #10
                    Originally posted by Vernon View Post
                    hey,
                    Here is a picture of my bench if you want a close up let me know Hope this helps you or maybe just a good ideal. Vernon
                    I like the table. only one problem that I would have with it i need to have room to walk all the way around.

                    Comment


                    • #11
                      Nice Table Palongee

                      I would like to duplicate your design and make a similar table for my shop. I too, am just learning to TIG and need a sit down place to weld. You did a beautiful job from what I can see..... (I have the same floor problem, nothing level)

                      I do have a couple of questions. How did you attach the top, and just out of curiosity, why did you make it 34" tall?

                      thanks for sharing,

                      mike

                      Comment


                      • #12
                        thanks

                        Thanks for the comments! The table has worked out very nicely. I would have like to have drilled and bolted the top on but I opted to weld it, I made probably a dozen small welds on the underside here and there, I did make small welds with the thought of removing it down the road if I ever needed to. I had a nice stool and 34" to the top is what I came up with that would be a comfortable and usable height. The top was already cut, so I built the table around the piece that I found. Im still lacking a torch holder, ill get to that eventually. Heres a pic of my big table, its been really handy as well. If you would like measurements, ill hook you up! Thanks. Mike
                        Attached Files

                        Comment


                        • #13
                          Originally posted by m.k.swelding View Post
                          I like the table. only one problem that I would have with it i need to have room to walk all the way around.
                          Could be out in the middle of floor just don't have alot of room in my small shop.
                          Vernon

                          Comment


                          • #14
                            Nice...... thanks for sharing

                            mike

                            Comment


                            • #15
                              That is very nice. I need to find myself a good table. I'm gona have to have an outside table for stick also.

                              Comment

                              Working...
                              X