Announcement

Collapse
No announcement yet.

MM211 custom welding cart

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • MM211 custom welding cart

    This is the welding cart I built for my MM211 welder. I wanted more than just the plain cart avalible for it that has no storage. A welder is just the start, then you make 50 trips to get everything you need. I made places to carry the spoolgun in its box, a small tackel box to carry extra tips and parts, an aluminimum box for gloves, wire, pliers, wrench, wire brush, and other stuff. The front has a holder to roll the cables up on and a sleave to hold the gun while working, also a holder for mig pliers. The machine is bolted to the cart and there is a storage bin between the welder and bottles for the mig whip when using the spool gun. The welder is set to one side making a small ledge to give a work area to set tools and wire rolls on while changing spools. There is a capability to hold 3 bottles and they are secured from moving with 2 ratchet straps. There is a lifting ring on top so the whole rig can be lifted into a truck or trailer ready to weld. A few strategic cross bars to attach tie downs to and she is ready to go.
    Click image for larger version

Name:	211 Welder cart.jpg
Views:	3
Size:	89.6 KB
ID:	526910

    Click image for larger version

Name:	Front with Gun Holder.jpg
Views:	2
Size:	90.0 KB
ID:	526911

    Click image for larger version

Name:	Side work space.jpg
Views:	1
Size:	95.6 KB
ID:	526912

    Click image for larger version

Name:	Spool gun storage.jpg
Views:	2
Size:	86.1 KB
ID:	526913

    Click image for larger version

Name:	Tip Box.jpg
Views:	1
Size:	81.2 KB
ID:	526914
    "The only source of knowledge is experience." Albert Einstein

  • #2
    Nice job. Switch your spoolgun over to the regular mig gun tip and you can get rid of 1/2 of your tips and the expense of those little tips...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      Very nice! I like the 4-gang j-box on the front of the cart too! All you need is a couple hooks to hang your grinders and hood on and you'll have the complete mobile work station!
      Millermatic350P/Python, MillermaticReach/Q300
      Millermatic175
      MillermaticPassport/Q300
      HTP MIG200
      PowCon 300SM, MK Cobramatic
      ThermalArc 185ACDC, Dynaflux Tig'r, CK-20
      DialarcHF, Radiator-1
      Hypertherm PowerMax 380
      Purox oxy/ace
      Jackson EQC
      -F350 CrewCab 4x4
      -LoadNGo utility bed
      -Bobcat 250NT
      -PassportPlus/Q300
      -XMT304/Optima/Spoolmatic15A
      -Suitcase8RC/Q400
      -Suitcase12RC/Q300
      -Smith oxy/propane
      -Jackson EQC

      Comment


      • #4
        Nice job.
        Nick
        Miller 252 Mig
        Miller Cricket XL
        Millermatic 150 Mig
        Miller Syncrowave 200 Tig
        2-O/A outfits
        Jet Lathe and Mill
        Jet 7x12 horz/vert band saw
        DeWalt Multi Cutter metal saw
        Century 50 Amp Plasma Cutter
        20 ton electric/hydraulic vertical press
        Propane Forge
        60" X 60" router/plasma table

        www.youtube.com/watch?v=jTu7wicVCmQ
        Vist my site: www.nixstuff.com
        and check out some of my ironwork and other stuff

        Comment


        • #5
          Nice job, my only suggestion would be to raise the gun holder up some.
          A little too low for me !

          All in All, nice job though !!

          ................... Norm
          - Arcair- K 4000 CAC.
          - LN - 25
          - Lincoln Ranger 8
          -DeWalt Compressor

          www.normsmobilewelding.blogspot.com

          Comment


          • #6
            at least it holds everything togather.

            Comment

            Working...
            X