Announcement

Collapse
No announcement yet.

Fabricating a merge collector

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fabricating a merge collector

    I am in the process of building a turbo manifold, and am in need to make a 4-1 merge collector. I am using all sch10 304ss 1.5" tubing/fittings. So pretty much all I have been using is a 14" cut off saw for cutting my materials. So, any ideas on how to fabricate or even begin to design a nice collector? I know I can purchase one online for about 100 bucks, but I like learning/trying new things to do things on my own

  • #2
    Obviously you are going to need some other method of cutting small parts.
    Fit-up on a part such as this is everything IMO.

    www.facebook.com/outbackaluminumwelding
    Miller Dynasty 700...OH YEA BABY!!
    MM 350P...PULSE SPRAYIN' MONSTER
    Miller Dynasty 280 with AC independent expansion card
    Miller Dynasty 200 DX "Blue Lightning"

    Miller Bobcat 225 NT (what I began my present Biz with!)
    Miller 30-A Spoolgun
    Miller WC-115-A
    Miller Spectrum 300
    Miller 225 Thunderbolt (my first machine bought new 1980)
    Miller Digital Elite Titanium 9400

    Comment


    • #3
      What would you recommend using?

      Comment


      • #4
        I've seen people use a verticle bandsaw to make the cuts for the manifold pipes. Gave a nice cut and it's easy to position the pipes so you get the cut you want.

        Comment


        • #5
          I havent made any merge collectors, but I have made a couple high velocity merged y pipes. I use a vertical metal bandsaw...

          PS. the $100 merge collectors are junk... a good one is ~$500 easy....
          Voigt Precision Welding, Inc.

          Miller Dynasty 200 DX, Miller Syncrowave 250, MillerMatic 252, Hypertherm Powermax 45, Auto Arc Trailpower 8000,272+187 lb Peter Wright anvil, 120 lb Fisher-norris, and more! Buffalo drill press, Grizzly Horiz. Bandsaw, Edwards shear, Barth Shear, bantam mechanical ironworker, Hopkins fly press, Doall Bandsaw, brown and sharpe surface grinder.

          2007 Silverado 2500HD (tow vehicle)
          2000 Camaro SS (Race car)
          sigpic

          Comment


          • #6
            Any one have any specific models of a metal cutting vertical band saw that they have had good luck with? How about any smaller units that dont take up too much space?Thanks Mike

            Comment


            • #7
              This should help:

              http://weirtech.ca/howto-1.html
              sigpic

              Comment

              Working...
              X