If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
yep it's a an old plow disk, I don't know what size grate it is... just bought it at as salvaged steel for 35 cents a pound because I figured it would work on my table... drew these and cut them out this morning, so it works gooood
[QUOTE=Bert;18017]Jim, how did you get the different colors on the dog? and what settings did you use on your plasma?
It's silver (polished stainless) those are just light reflections
Just one setting... "off and on"..
Nice cutting table. Made one similar, except on mine I made the slats removable (so they could be easily replaced) and sized the table to fit over a 55 gal drum. Your's definitely takes up a lot less room.
Not to be critical, but with the dog (good job by the way) it looks like an axe murderer wacked off the head. (maybe a smooth cut would have looked better).
Syncrowave 250 DX Tigrunner
Dynasty 200 DX
Miller XMT 304 w/714D Feeder & Optima Control
Miller MM 251 w/Q300 & 30A SG
Dialarc 250 AC/DC
Hypertherm PM 600 & 1250
Wilton 7"x12" bandsaw
PC Dry Cut Saw, Dewalt Chop Saw
Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
Thermco and Smith (2) Gas Mixers
More grinders than hands
better remember to get the car out first, but great lil table.
just on and off ?? what cutter do you have, thats popping the breaker ? i have the spectrum 125-C its got the compressor built in and its never given me any power problems even on an extension cord.
great looking animals.
thanks for the help
hope i helped
feel free to shoot me an e-mail direct i have time to chat. email@example.com summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
Nice looking platform. Just a side note, I would be leary of setting something heavy on it, it will happen. The base is fine for light things.
I have a small 3 legged round table that I seldem use but I sometimes use it for the vice to set on, once the combined wieght of the vice, metal and my pulling on it, the table fell over just missing my foot.
(my side bussiness)
Miller Synchrowave 350LX with tigrunner
Esab 450i with wire feeder
Thermal Dynamics cutmaster 51 plasma cutter
Miller aircrafter 330 - sold
Marathon 315mm coldsaw
vertical and horizontal band saws
Dewalt cut off saw
Sand blast cabinet
lots of hand grinders