If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What kind of fireplace ......wood or gas. I built metal doors for a custom fireplace I had in another home. I used pyrex but should have used tempered glass. It would have been more expensive though and I would have to wait. They have to cut the glass and send it away to be tempered.
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
60" X 60" router/plasma table
Fire place blowers are available on e-bay, grainger, and we even have a farm store here that carries them on the shelf. You'll pay approx $40.00-??? per blower, you may see a sale slide by on ebay for less, just be sure to check its output (CFM's). As far as tempered glass, when I was growing up in my parents house, every year we would break a piece in the fire place and would just go to the glass shop and they would cut us a new one on the spot or at least that is how I remember it. your local glass shop may have some typical thicknesses, but if you need an odd ball size/thickness...what ever that is... or want it in the shape of a unicorn you may have to wait or special order it.
I built a fire pit 30 " wideX 24" deepX26 " high and it has door and sides with expanded metal it sure burns the wood quick so I need to enclose the sides maybe even the door to slow down burn time
Thanks for your help