Announcement

Collapse
No announcement yet.

Lets see your tig carts!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • UH60LCHIEF
    started a topic Lets see your tig carts!

    Lets see your tig carts!

    I'm looking for ideas because I'm going to build one for my be Dynasty200 and coolmate 1. I wanted to see what you guys (the experts) have come up with and make my own design. I like the one miller makes but I wanted something that is a bit thinner i.e. tank in the rear as space in my garage is tight. Thanks in advance for any replies.

    Mark

  • Buddy T
    replied
    bigger pics

    my daughter helped me post them I am still learning how to do this will try to make them bigger when she gets home

    Leave a comment:


  • UH60LCHIEF
    replied
    that looks like a nice one Buddy. Do you have any bigger pics?

    Leave a comment:


  • Buddy T
    replied
    tig cart

    Leave a comment:


  • m.k.swelding
    replied
    Originally posted by pcwelder View Post
    Left over 1" square tubing and diamond plate. Some all terrain tires and a bunch of time later.
    I like this desighn myself.

    Leave a comment:


  • crawdaddy
    replied
    Originally posted by dbardos View Post
    sneak peak at my tig 4wheel drive cart not 100% finished yet ,


    the black circles are pvc pipe ends for holding my tig rod
    I am building a very similar(almost exact) filler rod holder,I was going to frame the sheetmetal from below keeping the square tube hidden, but after looking at your idea I am going to frame it along the edges I like that look.Mike

    Leave a comment:


  • dbardos
    replied
    sneak peak at my tig 4wheel drive cart not 100% finished yet ,


    the black circles are pvc pipe ends for holding my tig rod
    Last edited by dbardos; 08-06-2009, 09:53 PM.

    Leave a comment:


  • sdstoney
    replied
    TIG/ MIG/ Plasma Cart

    I was wanting to put my TIG, MIG, and plasma on one cart with both bottles. I have two 200cf bottles for my processes and I got it done. It rides really well and is really strong with no worries of the bottles dragging. There is a lot of cables with all the machines, and the cable management seems to be under control as much as possible. I went with aluminum to keep the corrosion down and also it is just nice to showcase my welds on my cart. I gave my old cart away to my neighbor (who was delighted), but I alway say, "Out with the old and in with the new." Enjoy.
    Attached Files

    Leave a comment:


  • dbardos
    replied
    will add picture soon im building it atm

    Leave a comment:


  • BC Iron works
    replied
    i made this
    Attached Files

    Leave a comment:


  • UH60LCHIEF
    replied
    Thanks to everyone who posted. I've got a pretty good plan in the old knoggen going now. I'm going to measure out the machines and material and design it in autocad so I'll know everything will fit. Then it's time to burn some metal

    Leave a comment:


  • crawdaddy
    replied
    Originally posted by gordfraser View Post
    any idea what wall thickness this one is made from?
    I was in a rush when I saw it ,a rep from ESAB was pitching their new tig unit so I just snapped a couple photos on my way out the door,But the material looked pretty light.Miller offers something similar for the Dynasty if you look under product/carts page,The main difference is the Miller design has the units riding to the back and above the wheels instead of to the side.Mike

    Leave a comment:


  • gordfraser
    replied
    Originally posted by crawdaddy View Post
    This is the ESAB cart I was talking about see if the picture works.Mike
    any idea what wall thickness this one is made from?

    Leave a comment:


  • gordfraser
    replied
    Originally posted by crawdaddy View Post
    This is the ESAB cart I was talking about see if the picture works.Mike
    I like that one. small and maneuverable.
    I'm not sure about the ones with 2 bigger wheels on the back and 2 small swivel casters on the front. I think that the small castors will trip up on even a rod stub.

    This one is All terrain.

    G

    Leave a comment:


  • OldDeadOne
    replied
    Originally posted by Shamrock1123 View Post
    I fabricated this one out of .065 tube.

    Dude that looks awesome,that's gonna be my first project when I get myself a decent welder.

    Leave a comment:

Working...
X