Announcement

Collapse
No announcement yet.

XMT´s and Diversion on 50Hz??

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • XMT´s and Diversion on 50Hz??

    Hi to all. I have noted in Miller´s machine pdf that some are advertised suitable to be used with 50/60 Hz power and some not. My local Miller representative tells me that some units advertised only for 60Hz, can work with 50Hz and others not.
    I intend to buy a Diversion 165 and an XMT 304 or 350 CC/CV in the near future, so my question is, will these machines work with my power supply 230 VAC and 50 Hz??
    Thank´s for your input!

    Regards:

    Jerónimo.
    Jerónimo.

    Traumao č la elčtrica.

  • #2
    Go for it, inverters don't care what the initial frequency is as they build it up to over 20Khz.

    Comment


    • #3
      Thanks Cruizer, I understand that inverters rectify the AC current as a first stage and then work it from DC. I was just worried the units could take some kind of signal from the base frequency.

      Out of this tread, as you may have noticed I am ouside US. I have just read some treads on Weld ALert remotes, is there any source to buy them on line?
      Will the 3 turn unit work with my CST?

      Thanks!

      Regards:

      Jerónimo.
      Jerónimo.

      Traumao č la elčtrica.

      Comment

      Working...
      X