Announcement

Collapse
No announcement yet.

Just A few Projects

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Just A few Projects

    Hello all,
    I had the opportunity to take my welder in to work for a few projects.
    The first is a dock bumper repair, the bumper had been hit a lot and needed to be welded back to the wall.
    The second is for an aluminum material pick up wand, the weld broke. I cut out the old weld and drilled a few holes for some plug welds.
    The last pic. is a shelf I made for my Tool box so that I could mount a small Vise on it. Its 1/8" sheet with 1" square tube supports.
    g6Racer
    Attached Files
    Miller Dynasty 200 DX
    Miller Spectrum 375 X-TREME

  • #2
    Good work buddy, and keep posting them pictures, I never get tired of them.
    If you want peace, be prepared for war!

    Comment


    • #3
      Company Asset

      Hey there Racer. Looks like you got everything fixed and ready to go. You are also showing that your an asset to your employer hopefully they will see it as well.
      Bob

      Comment


      • #4
        Thanks Guys,
        I have really enjoyed welding the welding I have done so far.
        Here is a 55 gallon Drum key that I made for my brother. His was stolen at the track.
        Its 1" square x 1/8" with 1/4" ears.
        Attached Files
        Last edited by g6Racer; 06-29-2009, 09:22 PM. Reason: Speel Checks
        Miller Dynasty 200 DX
        Miller Spectrum 375 X-TREME

        Comment


        • #5
          Whats a drum key?
          If you want peace, be prepared for war!

          Comment


          • #6
            Its used to open 55 gallon drums, there's a threaded hole in the top.
            The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

            Comment


            • #7
              some of my photos





              Attached Files

              Comment

              Working...
              X