Here are some pictures of a gate that I'm making to replace the wooden one that is falling apart. The first one is the gate nothing fancy. The third picture is the base plate that I anchored in the concrete. I will weld a 2-1/2" square 3/16" tube to the plate pictures to follow. The fourth picture is were the gate will end up after the wooden gate will be taken down. The last picture is the iron gate up against the wooden gate that will be trashed. Still have alot of work to do. I need to paint the gate, poles, floor plates and hardware. Then it all has to be put together. Wish me luck I have never done anything like this before a first time. Once hung and operating properly at that time I would like to put some artistic pieces to give it a custom look. I'll post more pictures as I go along. Aloha!!
No announcement yet.
My first gate project (very simple)