Announcement

Collapse
No announcement yet.

new projects

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • new projects

    welding table- 4 ft x 4 ft, 3/8 in thick
    Attached Files
    Matt

    Syncrowave 200
    Thermal Dynamics Cutmaster 52
    Victor O/A
    Smithy Midas 1220 Lathe- Mill
    Bandsaw- 20 yr old Harbor Freight type
    Speedglas

  • #2
    Nice looking table. May I ask what size adjusters did you use on the legs?

    Miller 211 A.S. and Spoolmate 100
    Stickmate LX 235 AC / 160 DC.
    Clarke 180 EN Just in case
    Spectrum 375 X-Treme.
    O/A Medium Radnor Torch, Large Victor Torch.
    Milwaukee 14" Chop Saw.
    4 x 6 Horizontal Band Saw.
    Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
    Jackson Passive shade #5 for the plasma.
    I almost forgot the Hobart XVP AD Hood.


    Projects and Misc Albums
    http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

    Comment


    • #3
      tig torch holder- trying to practice aluminum
      Attached Files
      Matt

      Syncrowave 200
      Thermal Dynamics Cutmaster 52
      Victor O/A
      Smithy Midas 1220 Lathe- Mill
      Bandsaw- 20 yr old Harbor Freight type
      Speedglas

      Comment


      • #4
        just 3/4 in bolts w/ nut welded on bottom of leg and second nut to lock it in place
        Matt

        Syncrowave 200
        Thermal Dynamics Cutmaster 52
        Victor O/A
        Smithy Midas 1220 Lathe- Mill
        Bandsaw- 20 yr old Harbor Freight type
        Speedglas

        Comment


        • #5
          Nice design on the TIG torch holder. You might want to weld some angle supports between those legs. Stiffens it up and gives you a great place to store clamps and magnets.
          DAVE Dynasty 200DX with Coolmate 3
          Millermatic 212 Auto Set
          Millermatic 140 Auto Set
          Hobart Airforce 400 Plasma Cutter
          JD2 Tube Bender

          Comment

          Working...
          X