Announcement

Collapse
No announcement yet.

broken Vice !! need help!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    sorry for getting off track. i really just wanted to put a finish to the vice repair, letting all know its repaired.

    a BBQ
    some charcoal
    a card board box full of kitty litter
    a $13 pack of Nomacast 1/8"
    a TA-185
    and all is good to go.

    so i add myself to the list who say if you break your vise and have the option, give it a try. after all you got very little to lose and every thing to gain. i really su ck at stick so if i can do it anyone can.
    thanks for the help
    ......or..........
    hope i helped
    sigpic
    feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
    summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
    JAMES

    Comment


    • #62
      braze it

      put the brass to it and be done with it,

      Comment


      • #63
        Vice

        I would weld it with 7018 and take a chipping hammer between welds tap it all over to releave stress on the cast. I call it ping the metal. Had a lot of good luck with this. If it want weld with 7018 than it not cast steel and the vise is not good material for a vice anyways. Ni rods are not good for stress parts like vices. good luck.
        Vernon
        Last edited by Vernon; 12-08-2009, 04:26 PM.

        Comment

        Working...
        X