Announcement

Collapse
No announcement yet.

OT Hawk question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Hey Monte!!!!!! Here's another way to get rid of squirrels, plus you can feed your hawks!!!!! With any luck, they can catch them on the fly, mebbe you could even video it for us!!!!




    I think this is humane???? At least it leaves your porch alive, huh??? Once it crosses your property line, not your problem anymore, right??? Hopefully the hawks are quick and efficient
    Last edited by JSFAB; 05-17-2009, 09:45 PM.
    Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....

    Comment


    • #17
      Originally posted by JSFAB View Post
      Hey Monte!!!!!! Here's another way to get rid of squirrels, plus you can feed your hawks!!!!! With any luck, they can catch them on the fly, mebbe you could even video it for us!!!!




      I think this is humane???? At least it leaves your porch alive, huh??? Once it crosses your property line, not your problem anymore, right??? Hopefully the hawks are quick and efficient
      ROTFL
      That is a simple yet effective method of removal.

      FLAME ON!

      Comment


      • #18
        I was welding up this little work bench today and took a picture showing where the hawk nest is from near my work area.
        Attached Files

        Comment


        • #19
          Originally posted by Twocentsworth View Post
          I was welding up this little work bench today and took a picture showing where the hawk nest is from near my work area.
          Good one man and it's totally related
          Nick
          Miller 252 Mig
          Miller Cricket XL
          Millermatic 150 Mig
          Miller Syncrowave 200 Tig
          2-O/A outfits
          Jet Lathe and Mill
          Jet 7x12 horz/vert band saw
          DeWalt Multi Cutter metal saw
          Century 50 Amp Plasma Cutter
          20 ton electric/hydraulic vertical press
          Propane Forge
          60" X 60" router/plasma table

          www.youtube.com/watch?v=jTu7wicVCmQ
          Vist my site: www.nixstuff.com
          and check out some of my ironwork and other stuff

          Comment


          • #20
            Yes Sir,

            I imagine ol Johnny, using that table as a bench rest, could pop that ol hawk with that air rifle. Definitely had enough scope on it so he should get a good "sight picture".
            Syncrowave 250 DX Tigrunner
            Dynasty 200 DX
            Miller XMT 304 w/714D Feeder & Optima Control
            Miller MM 251 w/Q300 & 30A SG
            Hobart HH187
            Dialarc 250 AC/DC
            Hypertherm PM 600 & 1250
            Wilton 7"x12" bandsaw
            PC Dry Cut Saw, Dewalt Chop Saw
            Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
            Thermco and Smith (2) Gas Mixers
            More grinders than hands

            Comment


            • #21
              OT Hawk update

              Got back this afternoon and checked the nest. We have at least one chick.

              Nick
              Last edited by monte55; 05-20-2009, 02:24 PM.
              Nick
              Miller 252 Mig
              Miller Cricket XL
              Millermatic 150 Mig
              Miller Syncrowave 200 Tig
              2-O/A outfits
              Jet Lathe and Mill
              Jet 7x12 horz/vert band saw
              DeWalt Multi Cutter metal saw
              Century 50 Amp Plasma Cutter
              20 ton electric/hydraulic vertical press
              Propane Forge
              60" X 60" router/plasma table

              www.youtube.com/watch?v=jTu7wicVCmQ
              Vist my site: www.nixstuff.com
              and check out some of my ironwork and other stuff

              Comment


              • #22
                Originally posted by reggie
                explain mentally challenged........
                YOU sir, are making this thread 100% entertaining!

                Comment


                • #23
                  Originally posted by Twocentsworth View Post
                  I was welding up this little work bench today and took a picture showing where the hawk nest is from near my work area.
                  Nice picture on the welding bench. Looks like you have some prime land there. Any deer in the area ? I'm thinking of putting a salt lick out back for ours. Wish we had hawks close by, I see them around here, just not close to home.
                  Ken

                  What else is there besides welding and riding. Besides that

                  Miller Thunderbolt XL 300/200 AC/DC
                  Hobart Handler 187
                  Dewalt Chop Saw
                  4" Air Grinder
                  Die Grinder
                  Rigid Drill Press
                  Kellogg 10hp Air Compressor


                  2009 FXDC

                  Comment


                  • #24
                    Originally posted by monte55
                    NO.................am I not on your ignore list yet?
                    Nick - Let it go. It's just not worth it. I for one am enjoying your post as I have a couple of red shouldered hawks (red tails first cousin) that visit my house about once a day. We have a lot of squirrels around. Not as many as before, though. So I can relate to your joy at seeing some of nature's wonders.

                    To satisfy all, when I weld or work outside my shop I see them either circling overhead, perched on nearby trees, or my fence. Since I'm a lifelong nature lover, I consider it a real treat when they visit.

                    Keep up the interesting posts Nick.

                    Comment


                    • #25
                      what gives

                      I dont post much, but i read these threads enough to know that if a "newbe" were to ask a question like monte asked, he would have been loaded up with responses stating that he was lazy or should have done a search before hand (off topic thread or not)..I am not trying to imply that we/you should start calling monte lazy, but why the rudeness toward the newbe and all's fine to the regular? (other than the little spat in this post)
                      MM 211
                      Hobart stickmate AC/DC
                      Miller Bobcat 225G
                      CutMaster 39
                      And a few other tools here and there

                      Comment


                      • #26
                        Originally posted by monte55 View Post
                        This post is only for anyone that cares. It's not for KB Fab...............
                        Dynasty 350DX
                        Dynasty 200DX TigRunner
                        MM 350P
                        MM Passport Plus
                        Spectrum 375 Extreme
                        08' Trailblazer 302

                        Comment


                        • #27
                          Mom and Baby Hawk

                          http://www.youtube.com/watch?v=DN3mrktYpy8


                          Here is Mom and Baby. Keep close eye about 45 sec into the video to the right of Mom in the nest, baby poppin up. You will see the little head with light colored fuzz and dark eyes.
                          The tree is quite far away from from the camera and the optical zoom was on max at 25x.
                          It was windy as you can see. Camera was on a tripod.
                          Last edited by monte55; 05-18-2009, 06:29 PM.
                          Nick
                          Miller 252 Mig
                          Miller Cricket XL
                          Millermatic 150 Mig
                          Miller Syncrowave 200 Tig
                          2-O/A outfits
                          Jet Lathe and Mill
                          Jet 7x12 horz/vert band saw
                          DeWalt Multi Cutter metal saw
                          Century 50 Amp Plasma Cutter
                          20 ton electric/hydraulic vertical press
                          Propane Forge
                          60" X 60" router/plasma table

                          www.youtube.com/watch?v=jTu7wicVCmQ
                          Vist my site: www.nixstuff.com
                          and check out some of my ironwork and other stuff

                          Comment


                          • #28
                            Originally posted by thatsgre8t View Post
                            I dont post much, but i read these threads enough to know that if a "newbe" were to ask a question like monte asked, he would have been loaded up with responses stating that he was lazy or should have done a search before hand (off topic thread or not)..I am not trying to imply that we/you should start calling monte lazy, but why the rudeness toward the newbe and all's fine to the regular? (other than the little spat in this post)
                            I totally agree with you. I think anyone should be able to ask any question at any time and not be crucified. If they don't like the question, then pass it up.
                            But you will see that is just not the case here. Set your watch.........it's coming..................Nick
                            Nick
                            Miller 252 Mig
                            Miller Cricket XL
                            Millermatic 150 Mig
                            Miller Syncrowave 200 Tig
                            2-O/A outfits
                            Jet Lathe and Mill
                            Jet 7x12 horz/vert band saw
                            DeWalt Multi Cutter metal saw
                            Century 50 Amp Plasma Cutter
                            20 ton electric/hydraulic vertical press
                            Propane Forge
                            60" X 60" router/plasma table

                            www.youtube.com/watch?v=jTu7wicVCmQ
                            Vist my site: www.nixstuff.com
                            and check out some of my ironwork and other stuff

                            Comment


                            • #29
                              Monte is going to sick the Hawk on you ne'er-do-wells.
                              Millermatic 211 AutoSet w/MVP
                              Century 110 volt 90/110 MIG-Gone to my son, in Texas
                              Victor SuperRange OA
                              Milwaukee Cold Cut Saw
                              Milwaukee Portable Deep Cut Bandsaw
                              Milwaukee Hole Hawg
                              Jet Horizontal/Vertical Bandsaw
                              Jet MD-18 Mill Drill
                              Orbit Drill Press
                              12 Ton Floor Press
                              2002 E-350 V-10:
                              1983 F-150 4.9L 6
                              2004 Honda ST1300
                              2007 Suzuki LTA400F Quad
                              1997 Suzuki DR650

                              Comment


                              • #30
                                Nick, great video, thanks for posting
                                Ken

                                What else is there besides welding and riding. Besides that

                                Miller Thunderbolt XL 300/200 AC/DC
                                Hobart Handler 187
                                Dewalt Chop Saw
                                4" Air Grinder
                                Die Grinder
                                Rigid Drill Press
                                Kellogg 10hp Air Compressor


                                2009 FXDC

                                Comment

                                Working...
                                X